un-cap Max Separation Limit?
- RAGEdemon
- Diamond Eyed Freakazoid!
- Posts: 740
- Joined: Thu Mar 01, 2007 1:34 pm
un-cap Max Separation Limit?
Hi fellas,
Is there a way to uncap the max separation from the limit of 5000.50%?
I find that in some games such as RPGs with a top down view, it just isn't enough.
I would really appreciate any help on this.
Regards,
-- Shahzad.
Is there a way to uncap the max separation from the limit of 5000.50%?
I find that in some games such as RPGs with a top down view, it just isn't enough.
I would really appreciate any help on this.
Regards,
-- Shahzad.
Windows 11 64-Bit | 12900K @ 5.3GHz | 2080 Ti OC | 32GB 3900MHz CL16 RAM | Optane PCIe SSD RAID-0 | Sound Blaster ZxR | 2x 2000W ButtKicker LFE | nVidia 3D Vision | 3D Projector @ DSR 1600p | HP Reverb G2
- CarlKenner
- Binocular Vision CONFIRMED!
- Posts: 332
- Joined: Tue Aug 28, 2007 12:22 pm
Maybe you can adjust the convergence instead?
Copy this code to clipboard: 0o1rp5zk then go to http://mtbs3d.com/naw to register. Use the code for $5000 startup bonus, and to support Gaza.
- RAGEdemon
- Diamond Eyed Freakazoid!
- Posts: 740
- Joined: Thu Mar 01, 2007 1:34 pm
I like to have the convergence on these top-down games so that the entire scene converges exactly at screen depth so it's like I'm playing on a toy model table... very cool effect. I wouldn't like to change the convergence from this setting as i really like the effect
Windows 11 64-Bit | 12900K @ 5.3GHz | 2080 Ti OC | 32GB 3900MHz CL16 RAM | Optane PCIe SSD RAID-0 | Sound Blaster ZxR | 2x 2000W ButtKicker LFE | nVidia 3D Vision | 3D Projector @ DSR 1600p | HP Reverb G2
- CarlKenner
- Binocular Vision CONFIRMED!
- Posts: 332
- Joined: Tue Aug 28, 2007 12:22 pm
Oh, ok! I thought you were aiming for the "look how far down all those buildings are!" effect.
Copy this code to clipboard: 0o1rp5zk then go to http://mtbs3d.com/naw to register. Use the code for $5000 startup bonus, and to support Gaza.
-
- Two Eyed Hopeful
- Posts: 57
- Joined: Sat Dec 22, 2007 3:38 am
- RAGEdemon
- Diamond Eyed Freakazoid!
- Posts: 740
- Joined: Thu Mar 01, 2007 1:34 pm
I tried looking intot he XML files in the "Application Data" folder. I could not find any value that might be what I am looking for
"separation" nor "5000" fail to yield any results.
Anyone?
-- Shahzad
"separation" nor "5000" fail to yield any results.
Anyone?
-- Shahzad
Last edited by RAGEdemon on Mon Oct 20, 2008 7:15 pm, edited 1 time in total.
Windows 11 64-Bit | 12900K @ 5.3GHz | 2080 Ti OC | 32GB 3900MHz CL16 RAM | Optane PCIe SSD RAID-0 | Sound Blaster ZxR | 2x 2000W ButtKicker LFE | nVidia 3D Vision | 3D Projector @ DSR 1600p | HP Reverb G2
- KindDragon
- Cross Eyed!
- Posts: 108
- Joined: Sat Mar 10, 2007 4:05 am
- Location: Russia
You can't uncap the max separation limit, but you can change separation scale <SeparationScale Value="any value" />
Stereoscopic Steam Group: Join now
-
- Two Eyed Hopeful
- Posts: 57
- Joined: Sat Dec 22, 2007 3:38 am
Yaa, KindDragon, thats what I mean. In the XML File you got these:
<One_div_ZPS Value="0.050442" />
<StereoBase Value="1.945508" />
From Medal of Honor Airiborne.
I guess, first one is convergence and second is seperation. Convergence seems to be the same number as ingame, but strangly seperation not. I think ingame i have something aroound 300%, but def. not 1.94%, or 19.4% nor 194%. I dont know, how this numbers is put together. But try some (high)values, it might work.
Somebody remember the default Standard seperation? Its 20% if Im not mistaken... So the standard default conf XML looks like this:
<One_div_ZPS Value="0.500000" />
<StereoBase Value="0.016000" />
I use Version 1.08.0023, the "old" 1.09 BETA, not BETA2.
<One_div_ZPS Value="0.050442" />
<StereoBase Value="1.945508" />
From Medal of Honor Airiborne.
I guess, first one is convergence and second is seperation. Convergence seems to be the same number as ingame, but strangly seperation not. I think ingame i have something aroound 300%, but def. not 1.94%, or 19.4% nor 194%. I dont know, how this numbers is put together. But try some (high)values, it might work.
Somebody remember the default Standard seperation? Its 20% if Im not mistaken... So the standard default conf XML looks like this:
<One_div_ZPS Value="0.500000" />
<StereoBase Value="0.016000" />
I use Version 1.08.0023, the "old" 1.09 BETA, not BETA2.
- RAGEdemon
- Diamond Eyed Freakazoid!
- Posts: 740
- Joined: Thu Mar 01, 2007 1:34 pm
Hi KindDragon
Sorry, I have been away.
Thank you for the tip.
However, I cannot seem to get it to work. I assume I'm meant to put the value in teh UserProfiles XML file under C:\Documents and Settings\[username]\Application Data\iZ3D Driver. I have put it towards the top before the profiles start, and under the sacred2 profile. It doesn't seem to have any affect on the game.
The value I am using is "20"
I would really appreciate some help please. It seems that the max separation is just an arbitrary value which should be easy to work around... hopefully using the <SeparationScale Value="20" /> variable.
Best Regards,
-- Shahzad
Sorry, I have been away.
Thank you for the tip.
However, I cannot seem to get it to work. I assume I'm meant to put the value in teh UserProfiles XML file under C:\Documents and Settings\[username]\Application Data\iZ3D Driver. I have put it towards the top before the profiles start, and under the sacred2 profile. It doesn't seem to have any affect on the game.
The value I am using is "20"
I would really appreciate some help please. It seems that the max separation is just an arbitrary value which should be easy to work around... hopefully using the <SeparationScale Value="20" /> variable.
Best Regards,
-- Shahzad
Windows 11 64-Bit | 12900K @ 5.3GHz | 2080 Ti OC | 32GB 3900MHz CL16 RAM | Optane PCIe SSD RAID-0 | Sound Blaster ZxR | 2x 2000W ButtKicker LFE | nVidia 3D Vision | 3D Projector @ DSR 1600p | HP Reverb G2
-
- Two Eyed Hopeful
- Posts: 57
- Joined: Sat Dec 22, 2007 3:38 am
Success
Hi RAGEdemon
I tried it and it works! (with Oblivion)
I changed the "StereoBase Value" to a value of 50. Then ingame, if I activate the IZ3D Driver, i get 6500% separation! Mission successful! 8)
Forget the "SeparationScale Value", this command does not exist, at least in my XML... Just change one of the three existing StereoBase Value Presets to a high number. It should work. At least in Oblivion it did, I hope you get it to work too. Good Luck!
Greetings
Phil
I tried it and it works! (with Oblivion)
I changed the "StereoBase Value" to a value of 50. Then ingame, if I activate the IZ3D Driver, i get 6500% separation! Mission successful! 8)
Forget the "SeparationScale Value", this command does not exist, at least in my XML... Just change one of the three existing StereoBase Value Presets to a high number. It should work. At least in Oblivion it did, I hope you get it to work too. Good Luck!
Greetings
Phil
- RAGEdemon
- Diamond Eyed Freakazoid!
- Posts: 740
- Joined: Thu Mar 01, 2007 1:34 pm
- KindDragon
- Cross Eyed!
- Posts: 108
- Joined: Sat Mar 10, 2007 4:05 am
- Location: Russia
How doesn't exist? Open config.xml from 1.09 and search SeparationScale. We use it, for example, for Google Earh.
Stereoscopic Steam Group: Join now
-
- Two Eyed Hopeful
- Posts: 57
- Joined: Sat Dec 22, 2007 3:38 am
Hm, thats strange... It doesnt exist in UserProfile.xml for Google:
<Profile Name="Google Earth">
<File Name="googleearth.exe" />
<Presets>
<SwapEyes Value="0" />
<LaserSightEnable Value="0" />
<Preset Index="0">
<One_div_ZPS Value="60.875374" />
<StereoBase Value="0.009715" />
<AutoFocusEnable Value="1" />
</Preset>
<Preset Index="1">
<One_div_ZPS Value="-8.775429" />
<StereoBase Value="0.147741" />
<AutoFocusEnable Value="1" />
</Preset>
<Preset Index="2">
<One_div_ZPS Value="0.500000" />
<StereoBase Value="0.016000" />
<AutoFocusEnable Value="0" />
</Preset>
</Presets>
<Keys />
</Profile>
I do not have config.xml.
I also noticed that in Statistic.xml under every Profile there is <DriverVersion Value="1.07.0000" />
Is this a problem? SHould it be 1.09?
<Profile Name="Google Earth">
<File Name="googleearth.exe" />
<Presets>
<SwapEyes Value="0" />
<LaserSightEnable Value="0" />
<Preset Index="0">
<One_div_ZPS Value="60.875374" />
<StereoBase Value="0.009715" />
<AutoFocusEnable Value="1" />
</Preset>
<Preset Index="1">
<One_div_ZPS Value="-8.775429" />
<StereoBase Value="0.147741" />
<AutoFocusEnable Value="1" />
</Preset>
<Preset Index="2">
<One_div_ZPS Value="0.500000" />
<StereoBase Value="0.016000" />
<AutoFocusEnable Value="0" />
</Preset>
</Presets>
<Keys />
</Profile>
I do not have config.xml.
I also noticed that in Statistic.xml under every Profile there is <DriverVersion Value="1.07.0000" />
Is this a problem? SHould it be 1.09?
- CarlKenner
- Binocular Vision CONFIRMED!
- Posts: 332
- Joined: Tue Aug 28, 2007 12:22 pm
Config.xml is hidden, where you will never, ever find it...
You may have thought you had beaten us when you found c:\Users\soundstorm\AppData\Roaming\iZ3D Driver\UserProfile.xml,
But you will never find C:\Users\soundstorm\AppData\Local\VirtualStore\Program Files\iZ3D Driver\Config.xml
Muahahahaha, muahahahaha!
You may have thought you had beaten us when you found c:\Users\soundstorm\AppData\Roaming\iZ3D Driver\UserProfile.xml,
But you will never find C:\Users\soundstorm\AppData\Local\VirtualStore\Program Files\iZ3D Driver\Config.xml
Muahahahaha, muahahahaha!
Copy this code to clipboard: 0o1rp5zk then go to http://mtbs3d.com/naw to register. Use the code for $5000 startup bonus, and to support Gaza.
-
- Two Eyed Hopeful
- Posts: 57
- Joined: Sat Dec 22, 2007 3:38 am
Ok, i found it now. Thanks for the info, I did not know this. Config.xml seems to be the Main Config for the driver.
But the solution for RageDemon still stands: Edit the UserProfile.xml and change "StereoBase Value" to a high number. With this method i get 6500% in Oblivion. No need to cange the Seperation Scale or what do you think? I imagine also, that the config File gets overwritten with a new install, so changes get lost maybe? In the User XML, it shouldnt...
I just try to help!! Don't be so hard on me!
By the way, my config is here: I:\Documents\All Users\Appliacation Data\iZ3D Driver
And the Userprofile.xml is here: I:\Documents\Soundstorm VFX\Application Data\iZ3D Driver
But the solution for RageDemon still stands: Edit the UserProfile.xml and change "StereoBase Value" to a high number. With this method i get 6500% in Oblivion. No need to cange the Seperation Scale or what do you think? I imagine also, that the config File gets overwritten with a new install, so changes get lost maybe? In the User XML, it shouldnt...
I just try to help!! Don't be so hard on me!
By the way, my config is here: I:\Documents\All Users\Appliacation Data\iZ3D Driver
And the Userprofile.xml is here: I:\Documents\Soundstorm VFX\Application Data\iZ3D Driver
- RAGEdemon
- Diamond Eyed Freakazoid!
- Posts: 740
- Joined: Thu Mar 01, 2007 1:34 pm
Thanks Guys!
I got KindDragon's tip working with CarlKenner's help. It works fantastic now.
soundstorm, I tried your method but i couldn't get it to work... maybe I was doing something wrong.
Thanks a bunch for your help. Very much appreciated all round.
-- Shahzad.
I got KindDragon's tip working with CarlKenner's help. It works fantastic now.
soundstorm, I tried your method but i couldn't get it to work... maybe I was doing something wrong.
Thanks a bunch for your help. Very much appreciated all round.
-- Shahzad.
Windows 11 64-Bit | 12900K @ 5.3GHz | 2080 Ti OC | 32GB 3900MHz CL16 RAM | Optane PCIe SSD RAID-0 | Sound Blaster ZxR | 2x 2000W ButtKicker LFE | nVidia 3D Vision | 3D Projector @ DSR 1600p | HP Reverb G2