Post Reply
One Eyed Hopeful
Posts: 11
Joined: Sat Jun 02, 2007 1:07 pm
Which stereoscopic 3D solution do you primarily use?: S-3D desktop monitor


Post by leftler »

Every time every someone brings up VRD they say that it is still in infancy and only monochrome. Well that is way off according to http://www.orichel.de/multiagent/papers ... ldisplays/ the spectrum display is full color and is on par with low end HMD devices. Plus that article was written in 2002, a lot of tech advances can happen in 5 years, does anyone know where to get current information for 2007 on vrd's?

Thanks guys.

User avatar
Sharp Eyed Eagle!
Posts: 404
Joined: Thu Mar 01, 2007 1:34 pm
Which stereoscopic 3D solution do you primarily use?: S-3D Projector Setup

Post by RAGEdemon »

How interesting...

This has little to do with VRD but I was reading about a micro display technology today which is going into mass production.


I don't know about VRD but with this technology on mass production, cheap HMDs for all seem to have taken one step closer.
Edit: Clarity | Windows 10 64-Bit | 7700K @ 5.1GHz | 2080 Ti | 32GB 3956MHz CL16 RAM | Optane SSD | Sound Blaster ZxR | 2x 2000W ButtKicker LFE | nVidia 3D Vision | 3D Projector @ DSR 1600p | Oculus Rift CV1

Post Reply

Return to “General Stereoscopic 3D Discussion”