Sony Xperia Z5 Premium's 5,5" 4k Display

This is for discussion and development of non-commercial open source VR/AR projects (e.g. Kickstarter applicable, etc). Contact MTBS admins at customerservice@mtbs3d.com if you are unsure if your efforts qualify.
Post Reply
cab
One Eyed Hopeful
Posts: 4
Joined: Wed Dec 02, 2015 12:11 pm

Sony Xperia Z5 Premium's 5,5" 4k Display

Post by cab »

Hi,
i want to build a custom HMD with an Arduino pro micro, a MPU6050 and the 5,5" 4k dispay of the recently released Sony Xperia Z5 Premium.
I have found a site where you can buy a replacement LCD for it: http://www.etradesupply.com/sony-xperia ... black.html .
The biggest problem of course is getting a display controller for it since it just been released.
Is there anyone out there working on something like that or has more information about this topic?

Haloar
One Eyed Hopeful
Posts: 32
Joined: Thu Dec 26, 2013 7:57 pm

Re: Sony Xperia Z5 Premium's 5,5" 4k Display

Post by Haloar »

LCD displays are normally driven by either MIPI DSI or Parallel RGB signals but I wouldn't know how to communicate with the device without a display datasheet. If it's a DSI signal a Snapdragon 8xx can communicate directly for a mobile HMD. If it's for a PC HMD then a HDMI or DisplayLink to DSI or Parallel is needed.
Is the Arduino for the IMU? I would recommend a Texas Instruments MCU for reading the IMU because they are faster and lower power.

Do you have any familiarity with electronics or low level firmware and driver programming?

Tril
Certif-Eyed!
Posts: 655
Joined: Tue Jul 31, 2007 6:52 am
Which stereoscopic 3D solution do you primarily use?: Head Mounted Display (HMD)
Location: Canada

Re: Sony Xperia Z5 Premium's 5,5" 4k Display

Post by Tril »

First, some warnings. That kind of project, if you don't use ready made hardware and software, requires very advanced knowledge on low level firmware and driver programming, plus advanced surface mount facilities to build the hardware. The necessary IC datasheets might be available only under NDA.

Your computer outputs HDMI. The screen probably takes MIPI DSI as input (just a guess, need to confirm).

You need some kind of adapter between the two with a lot of fast processing power. I suggest to google "hdmi to mipi" for some ideas.

It won't solve your problem but this shows a solution someone is working on for a similar project :
https://hackaday.io/project/364-mipi-ds ... mi-adapter

Toshiba also has a chip designed to do that that was used on Oculus DK2 :
http://toshiba.semicon-storage.com/us/p ... ridge.html

The OSVR HDK schematics, drawing and component list are available on GitHub. You might be able to see what kind of ICs they use to go from HDMI to the display input.
https://github.com/OSVR/OSVR-HDK

I took a quick look at the OSVR-HDK repository and found the following document on the hardware :
https://github.com/OSVR/OSVR-HDK/blob/m ... ecture.pdf

It shows the name of the parts used and how they are connected. You'll probably have trouble building this yourself. It's probably all surface mount so you need to have access to facilities designed to build this. Also, you might have trouble purchasing the parts in small quantities. I just looked up the HDMI Receiver NXP TDA19971BHN that's on the pdf above and some sources only sell it in minimum quantities of 3000.

Take a look at the picture of the screen upgrade kit for OSVR HDK 2.0 that uses a 2160 x 1200 screen. There's a lot of hardware packed on that small pcb and it's sold at only $220.
https://osvrstore.com/products/osvr-hdk ... 1-3-or-1-4

Supporting the OSVR project is probably a better investment in the long run. They'll eventually upgrade the screen as the technology matures.
CPU : Intel i7-7700K
RAM : 32 GB ram
Video card : GeForce GTX 980 Ti
OS : Windows 10
Display : Samsung UN40JU7500 Curved 40-Inch UHD TV with shutter glasses
HMD : Oculus Rift

Image

Post Reply

Return to “VR/AR Research & Development”