It is currently Fri Nov 15, 2019 3:42 pm



Reply to topic  [ 3 posts ] 
 DIY OR screen not detected SUDDENLY?¿?¿? 
Author Message
One Eyed Hopeful

Joined: Sat Jun 20, 2015 11:24 am
Posts: 7
Reply with quote
Hi mates, I have a serious problem with my DIY OR...it has been working fine in my laptop for several weeks but yesterday, after I received my DVI to HDMI adapter I connected it to my desktop system (gtx 970 MSI) throught the DVI out and the adapter...well It was inmediately recognized as a OR screen and I tested a demo for 5 minutes or so...then I decided to change anoption in the resolution menu (i dont remember what I changed as it was something without importance like split screen or extend screens or something like that) and SUDDENLY, the OR screen went black, the image reseted in my monitor and...my OR screen has NEVER been recognized again!!!!!!!!!!!!!! :shock: ...

I have tried 10000 times even in my laptop and NOTHING...the screen turns on when I connect it to the current but it never gets signal. I have tested ALL USBs, reseted everything in resolution options, nv panel, reinstalled drivers, etc. NOTHING seems to work...I CANT BELIEVE IT!!...all connections are fine, also weldings, everything is OK as it was working perfectly fine until I changed that damn option!!...how is that possible mates?? any ideas about that??


Tue Jul 21, 2015 6:26 am
Profile
Cross Eyed!

Joined: Tue May 13, 2014 10:56 pm
Posts: 113
Reply with quote
watermanpc wrote:
Hi mates, I have a serious problem with my DIY OR...it has been working fine in my laptop for several weeks but yesterday, after I received my DVI to HDMI adapter I connected it to my desktop system (gtx 970 MSI) throught the DVI out and the adapter...well It was inmediately recognized as a OR screen and I tested a demo for 5 minutes or so...then I decided to change anoption in the resolution menu (i dont remember what I changed as it was something without importance like split screen or extend screens or something like that) and SUDDENLY, the OR screen went black, the image reseted in my monitor and...my OR screen has NEVER been recognized again!!!!!!!!!!!!!! :shock: ...

I have tried 10000 times even in my laptop and NOTHING...the screen turns on when I connect it to the current but it never gets signal. I have tested ALL USBs, reseted everything in resolution options, nv panel, reinstalled drivers, etc. NOTHING seems to work...I CANT BELIEVE IT!!...all connections are fine, also weldings, everything is OK as it was working perfectly fine until I changed that damn option!!...how is that possible mates?? any ideas about that??


Do you have the Oculus Runtime or SDK installed, is it the new-er v0.6, if so that’s your problem, stick with the older Runtime or SDK.


Tue Jul 21, 2015 11:01 am
Profile
One Eyed Hopeful

Joined: Thu Jan 19, 2012 6:43 am
Posts: 26
Reply with quote
Might be a late answer but it happened to me recently, a few times. There is nothing wrong with the display or driver, it's about the software driver. Just locate the device in "device manager/monitors" and uninstall it, then refresh device manager (scan for new hardware) and it should light properly.

_________________
Crosseye 3D fullscreen gaming at correct aspect ratio


Mon Mar 21, 2016 12:51 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB® Forum Software © phpBB Group
Designed by STSoftware.