It is currently Sat Dec 14, 2019 9:58 pm



 [ 11 posts ] 
 Continuous 360 cord turning 
Author Message
Binocular Vision CONFIRMED!

Joined: Mon Jan 21, 2013 12:30 pm
Posts: 337
Was starting to hijack another thread, so I made a new one.

Took some research, but I actually found one for power cords. They make them for other cord types according to the PDF.





pdf


Sun Feb 17, 2013 7:54 pm
Certif-Eyable!
User avatar

Joined: Sat Dec 22, 2007 3:38 am
Posts: 990
I think I see a problem or two with this:
1. It looks like there may be 2 or 3 contacts through this which wouldn't be anywhere near enough for digital video and control signals.
2. Looks far too heavy for what you're trying to achieve. You want the swivel to be as light as possible to prevent the feeling that you're trying to turn something with your head.


Sun Feb 17, 2013 8:14 pm
3D Angel Eyes (Moderator)
User avatar

Joined: Sat Apr 12, 2008 8:18 pm
Posts: 11394
There was another thread about this very thing, except using something called "slip rings":

viewtopic.php?f=140&t=15933&p=89279

Image

Might be a good place to start looking.

_________________
check my blog - cybereality.com


Sun Feb 17, 2013 8:32 pm
Binocular Vision CONFIRMED!

Joined: Mon Jan 21, 2013 12:30 pm
Posts: 337
Thanks cyber, heard about slip rings, but didn't know about the thread. Looked at the page looks good, but maybe the other system is useful too if we need retractable. Might combine the rings with a retractable system. At least we got options.

Oh yeah, they said they make custom swivels too. I'm sure they could make a smaller commercial version.


Sun Feb 17, 2013 9:07 pm
Petrif-Eyed
User avatar

Joined: Sat Sep 01, 2012 10:47 pm
Posts: 2708
Those slip ring connectors were available with up to 10 wires, but looked expensive. It would be interesting to see what kind of signal cross-talk or signal impedance mismatches they might have (if that is even important on HDMI-speed digital signals). Depending on their construction, they may have signal integrity or lifespan issues.

As a though experiment, you can picture a slip ring connector as a variation on a headphone jack, which can be rotated in its connector without losing signal. However, you may hear scratchy noises due to friction and signal degradation. Real slip rings require special interface metals such as Tungsten/Gallium, or lubricated fiber contacts. Insufficient lubrication (such as in a rotating headphone jack) would cause poor signal integrity and premature wear.

Here is a slip ring connecter designed for ROV (underwater robot) use, which combiner fiber-optic, power, and signal lines:
http://www.electro-miniatures.com/Fiber_Optic.html
Image

And how they work:
http://www.electro-miniatures.com/HowSl ... orks.shtml
Image

Here is a 6-wire slip ring posted by adafruit for DIY use ($17.50):
http://www.adafruit.com/products/736


And another they have, with 12-wires ($24.95):
http://www.adafruit.com/products/1195
Image

The adafruit slip rings appear identical to cybereality's posted photo.

The wires can each carry 2A at up to 240V. Not sure about HDMI or USB signal integrity though (possible signal crosstalk at the slip rings).

_________________
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License. Image


Sun Feb 17, 2013 9:27 pm
Binocular Vision CONFIRMED!

Joined: Mon Jan 21, 2013 12:30 pm
Posts: 337
Never mind, Rift only has a single cable to the HMD. Ethernet might be useful for going to the control box.


Last edited by Direlight on Sat Feb 23, 2013 2:51 am, edited 2 times in total.



Sun Feb 17, 2013 10:35 pm
Petrif-Eyed
User avatar

Joined: Sat Sep 01, 2012 10:47 pm
Posts: 2708
Direlight wrote:
Isn't it possible to have the Rift do everything (even power) via Ethernet?

http://www.trustedreviews.com/news/HDMI-Under-Threat-From-New-Ethernet-Video-Standard
That comparison table was truncated, losing most of the HDBase-T info. Here is that table (intact):
Image

Interesting. Thanks for this welcome news!

_________________
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License. Image


Sun Feb 17, 2013 11:47 pm
Golden Eyed Wiseman! (or woman!)

Joined: Fri Jul 08, 2011 11:47 pm
Posts: 1498
Quote:
However, you may hear scratchy noises due to friction and signal degradation. Real slip rings require special interface metals such as Tungsten/Gallium, or lubricated fiber contacts. Insufficient lubrication (such as in a rotating headphone jack) would cause poor signal integrity and premature wear.


Well said. For any sort of long term usage (arcade setting), you really wouldn't want to cheap out on the contacts. I'd imagine there would be a bit of a tradeoff between connection integrity and resistance to turning. This could possibly be overcome with an active solution (motor drive that attempts to keep the twist out of the cable).


Mon Feb 18, 2013 2:37 am
Binocular Vision CONFIRMED!
User avatar

Joined: Mon May 24, 2010 8:43 pm
Posts: 209
Location: near Lancaster, PA USA
For those of you young enough to have not known about land lines without wireless handsets, there were phone-cord de-tangler connectors available They are cheap to play with. I don't recall if they have 2 or 4 wires.

However, I would think that any sort of rotary data connector is going to be a problem at today's high data rates. I wonder if an optical rotary is a better choice for the data line?

But, perhaps I am getting ahead of my self. What is the application? How many potential spins of the cable?

If you just need a data and power cord real and the end device is not rotating much, then you don't actually need to have a swivel connection. There are plenty of examples in the dollar store, where the earphone cord wraps around a device that is always in the middle of the length of the cord.

An old-fashioned telephone handset cord can swivel without a swivel connector... at least it can for a good number of turns. If you aren't connecting to a ballet dancer wearing a head set, then such a connection may be all that you need. They typically have 4 connectors.

Can you tell that I am unemployed? I tend to stay up at night hunting for something to design!

Joe Dunfee


Sat Feb 23, 2013 11:33 pm
Binocular Vision CONFIRMED!

Joined: Mon Jan 21, 2013 12:30 pm
Posts: 337
This looks expensive,


Image

http://www.uea-inc.com/products/slip-rings/contactless-slip-rings


Sun Feb 24, 2013 12:39 am
One Eyed Hopeful

Joined: Tue Jun 23, 2015 8:35 pm
Posts: 1
This one would suitable for you, details as follows:
http://www.arslipring.com


Sat Jun 27, 2015 9:55 am
Display posts from previous:  Sort by  
   [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by STSoftware.