[DIY] [solved REQ] Homebrew Controller

[PhreeZ]

The answer has been found! look at the last topics!

edited by sharky
--------------------------------
i'm interested in putting my old ASUS VR100 glasses to use again.

i'd like to build a homebrew controller to achieve this. the only schematics i could find are on the homebrew section of stereo3d. however, all links seem to be dead.

-are other schematics available for a controller compatible with the ASUS glasses? (i'd prefer a 4in1 over a 3in1 design)

-would it be possible to salvage the controller on my old ASUS video card?

thanks.

[sharky]

i put this in the DIY section as request..

[sharky]

the only thing i found is this one:

http://www.stereo3d.com/3dhome.htm

-----

rage said that it is not that easy to crate good working shutterglasses because the shutters need time to change from white to balck and backwards. he also said that it he finds the time he will post here.

ye the way i don't know if it is a good idea to break your brain on this! check the link below....

http://cgi.ebay.it/3D-PC-VIDEOBRILLE-WI ... dZViewItem

bye

sharky

[PhreeZ]

thanks for the move and the reply.

i thought this section was for S-3D Home Cinemas since its under that section.

the homebrew section i was referring to is on the same site.
http://www.stereo3d.com/homebrew.htm

i hope someone still has a copy of the 4in1/3in1 schematics by Andreas Schulz, that were linked there.

[sharky]

try to mail "evil"... maybe he can give you them... i searched over the web but did not find anything...

bye

[PhreeZ]

i was able to find archives of an old controller site by Andreas Schulz.

http://web.archive.org/web/200511030600 ... ller2.html

unfortunately, the circuit schematic (sd12_sch.gif) is missing.

does anyone happen to have it?

[PhreeZ]

it seems that andreas still hangs around the stereo3d forums.

if you are interested, he posted the schematic i was looking for.

[sharky]

the best would be if you post the schematics here so we can answer the "REQ" topic..

[PhreeZ]

i don't want to post the diagram without his permission.

so here's the link to the thread:
http://www.stereo3d.com/discus/messages ... 1186163150