Optoma HD27HDR, HD39HDR and GT1080HDR - REAL WORKING with 3DVision at 1920x1080x120 Hz!!!

[3DNovice]

...

[3DNovice]

...

[3DNovice]

...

[w8ing4some1]

Thank you so much for your guidance 3DNovice. I've read Paul Dusler's thread before and he says there he is using DLP glasses in CRT mode. Now I'm trying to figure out how to make them work with my projector as I'm hoping DLP glasses could filter out that green ghosting, similar to how they removed red tint in case with Benq w1070.
Do you think EDID override from UHD40 projector might produce a different result then forcing CRT mode via 3DFM? It looks like the tool in the reddit thread you mentioned does the same thing as 3DFM, namely sets StereoViewerType=1. I can confirm games are ran at fullHD@60hz when launched via 3DFM, maybe the green ghosting is a side effect of laser technology in UHZ50?

The green might be related to the color setting in NVCP, try full vs limited

What do you mean by saying try full vs limited? Is it Output Dynamic Range in section 3 of Change Resolution menu?

[3DNovice]

...

[skalpelMMA]

A severe greenish ghosting around light-colored objects can give а glasses. The DLP glasses did not work in CRT mode because the 3d function was turned off in the projector menu.try starting with the obvious things before you go further. sometimes it works)

[Guig2000]

Hello, if you use your projector with 3dvision crt mode, you have to activate manually the frame sequential 3d mode an dDLP glasses control on the projector.
Be aware the the projector will not know which are right and left frames, in 50% of the cases you will have to revert left/right within the projector's menu or glasses if available.