Polarization direction of active stereo monitors

120Hz or Polarized, this is the place to share your findings on what's out there!
Post Reply
User avatar
Petr
One Eyed Hopeful
Posts: 6
Joined: Sat Jun 05, 2010 12:56 am
Location: Russia

Polarization direction of active stereo monitors

Post by Petr »

I've tested Acer xb270h monitor with Nvidia and Xpand YOUniversal glasses and got an interesting results.
Image
IMAG0478_1.jpg
IMAG0477.jpg
Nvidia and Xpand glasses have different direction of polarizers.

Nvidia 3D Vision 2
IMAG0475.jpg
IMAG0476.jpg

Xpand YOUniversal Electronic 3D Eyewear
IMAG0472.jpg
IMAG0473.jpg
IMAG0474.jpg
Nvidia glasses are fully transparent at horizontal position, but Xpand YOUniversal transparent at diagonal position (45 deg).
Using of Xpand YOUniversal glasses with aset xb270h cause discomfort because of brightness changing during head tilting.

In other hand, Nvidia glasses have worse ergonomy,little more ghosting (worse lcd shutters or incorrect timings) and annoying hotspots at the rim.
IMAG0479.jpg
I wish to find a monitor that I could use with Xpand glasses.
If anyone have tested other 3D monitors with active stereo, please share your results!!
Thanks!!
You do not have the required permissions to view the files attached to this post.
User avatar
cybereality
3D Angel Eyes (Moderator)
Posts: 11407
Joined: Sat Apr 12, 2008 8:18 pm

Re: Polarization direction of active stereo monitors

Post by cybereality »

So aside from the polarization thing what do you think of the monitor?
User avatar
Likay
Petrif-Eyed
Posts: 2913
Joined: Sat Apr 07, 2007 4:34 pm
Location: Sweden

Re: Polarization direction of active stereo monitors

Post by Likay »

Since shutters and lcd's both use linear polarization as light control, this is the phenomena you will have. Also as you noticed, the direction of the polarization can be different between lcd-models. 0/90° are most common while there are a few 45/135°.
45/135° are well suited for passive stereomirror setups since no filters, just a pair a polarized 45/135° glasses will work.

If one pair of shutterglasses doesn't work with a monitor because of the polarization direction, then you can try adding a transparent sheet of a querterwave retarder in front of your glasses (or monitor). Rotate the retarder until the colors are fine. According to some, cellophane is fine and should at least work for testing.
Mb: Asus P5W DH Deluxe
Cpu: C2D E6600
Gb: Nvidia 7900GT + 8800GTX
3D:100" passive projector polarized setup + 22" IZ3D
Image
Post Reply

Return to “3D Monitors”