Hi all,
me: Windows 8.1 64 bit, 32gb ram, i7-2600k @ 3.4ghz. no overclocking. OS is in Japanese.
GeForce GTX 570
I just got my DK2 a few days ago, and it works great with several demos I found online. I /really/ want to get Skyrim or HL2 working with this, but have been having issues with vireio.
- I have used the nightly as well as the 2 versions immediately prior
- I have played with all combinations of the DK2 setup, e.g., disable / enable DK1 support, etc.
- I have set the DK2 as my primary monitor and ensured vireio is set to use it
- I select Oculus Rift (All Variants) and OculusTrack
- I run everything as administrator
- I copied the 4 DLL files to the Skyrim folder (without doing this I get entry point errors)
- I set notifications=0 in the xml config file
- vanilla Skyrim with no mods. complete reinstall
- I have tried WITH and WITHOUT the skyrim-specific DLL and fx file kicking around.
I tried similar options with HL2 and it had the same result.
Below is the trace spy on a skyrim run. There are a few things that bother me
- it says "Bypassing API injection" (is this because it knows the DLL already injects?)
- it says "created HMD Info for: DK1" but I have DK2
Any ideas of things I can try? Thanks!
SHIMVIEW: ShimInfo(Complete)
HIJACKDLL checking process:
TESV.exe
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
Found a profile!!!
D3D9.dll found in game directory (D:\Program Files (x86)\Steam\steamapps\common\skyrim\) - Bypassing API injection
Hx // Success opening key.
Hx // Success writing to Registry.
Hx // Success writing to Registry.
Hx // Success closing key.
SHIMVIEW: ShimInfo(Complete)
ExecCommandLine: ""D:\Program Files (x86)\Steam\steam.exe" -applaunch 72850 "
CWindowsGameExplorer::VerifyAccess: D:\Program Files (x86)\Steam\steamapps\common\Skyrim\TESV.exe HRES=0, HAS access=1
Game update: AppID 72850 "The Elder Scrolls V: Skyrim", ProcID 6064, IP 0.0.0.0:0
SHIMVIEW: ShimInfo(Complete)
HIJACKDLL checking process:
SkyrimLauncher.exe
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
Found a profile!!!
D3D9.dll found in game directory (D:\Program Files (x86)\Steam\steamapps\common\Skyrim\) - Bypassing API injection
Hx // Success opening key.
Hx // Success writing to Registry.
Hx // Success writing to Registry.
Hx // Success closing key.
Direct3DCreate9(32)
Couldn't open log file for writing.
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
Got base dir as:
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
D:\vireo\PerceptionOrig\cfg\config.xml
PxHelp TE: Success opening key.
PxHelp TE: Success with GetString.
SkyrimLauncher.exe
PxHelp TE: Success with GetString.
D:\Program Files (x86)\Steam\steamapps\common\Skyrim\
Got target exe as:
SkyrimLauncher.exe
PxHelp: Already have base value.
D:\vireo\PerceptionOrig\cfg\profiles.xml
Load the specific profile!!!
Set the config to profile!!!
gameType: 0
PxHelp: Already have base value.
D:\vireo\PerceptionOrig\cfg\users.xml
Load the specific user!!!
C:\Users\jim\AppData\Local\Oculus\Profiles.json
No Oculus User Profile present.
<wait at desktop launch screen>
<press play>
SHIMVIEW: ShimInfo(Complete)
HIJACKDLL checking process:
TESV.exe
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
Found a profile!!!
D3D9.dll found in game directory (D:\Program Files (x86)\Steam\steamapps\common\Skyrim\) - Bypassing API injection
Hx // Success opening key.
Hx // Success writing to Registry.
Hx // Success writing to Registry.
Hx // Success closing key.
Direct3DCreate9(32)
Couldn't open log file for writing.
Direct3DCreate9(32)
Couldn't open log file for writing.
[OK] Normal D3D device created
Number of back buffers = 1
Format of back buffers = 16
D3DSWAPEFFECT_DISCARD
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
Got base dir as:
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
D:\vireo\PerceptionOrig\cfg\config.xml
PxHelp TE: Success opening key.
PxHelp TE: Success with GetString.
TESV.exe
PxHelp TE: Success with GetString.
D:\Program Files (x86)\Steam\steamapps\common\Skyrim\
Got target exe as:
TESV.exe
PxHelp: Already have base value.
D:\vireo\PerceptionOrig\cfg\profiles.xml
Load the specific profile!!!
Set the config to profile!!!
gameType: 601
PxHelp: Already have base value.
PxHelp: Already have base value.
PxHelp: Already have base value.
D:\vireo\PerceptionOrig\cfg\users.xml
Load the specific user!!!
C:\Users\jim\AppData\Local\Oculus\Profiles.json
No Oculus User Profile present.
[OK] Config loading - OK
[OK] Stereo mode is enabled.
Config type: 601
D3D ProxyDev Created
Try to init VR Boost
VR Boost Loaded
Success loading VRboost methods.
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
scaleToFillHorizontal: 1.70152
Created HMD Info for: DK1
D3D ProxyDev Init
type: 601, aspect: 1.000000
Created SteroView
Created OculusRiftView
SteroView Init
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
SteroView initVertexBuffers
[OK] Vireio D3D device created.
GB - Try to init Tracker
Motion Tracker Created
Motion Tracker Init
OculusTracker Start
OculusTracker Initialized
Tracker Got
Setting Multipliers
Setting Mouse EMu
GB - Load VRboost rules...
Releasing All Memory Rules
Something is Null - Failing
Releasing All Memory Rules
SHIMVIEW: ShimInfo(Complete)
HIJACKDLL checking process:
GameOverlayUI.exe
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
PxHelp: Already have base value.
PxHelp: Success opening key.
PxHelp: Success with GetString.
D:\vireo\PerceptionOrig\
Game removed: AppID 72850 "The Elder Scrolls V: Skyrim", ProcID 7188
games crash with VIREIO - any debug strategies?
-
- One Eyed Hopeful
- Posts: 3
- Joined: Wed Oct 22, 2014 6:54 pm
-
- One Eyed Hopeful
- Posts: 3
- Joined: Wed Oct 22, 2014 6:54 pm
Re: games crash with VIREIO - any debug strategies?
UPDATE - now works out of the box with skyrim and hl2 with the newest DK2 drivers out today.
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: games crash with VIREIO - any debug strategies?
That's interesting! Glass top hear your issue is resolved.
-
- One Eyed Hopeful
- Posts: 3
- Joined: Wed Oct 22, 2014 6:54 pm
Re: games crash with VIREIO - any debug strategies?
Thanks
I'll also add for those reading up on getting skyrim working, that I did not need to do any of the tweaks listed online for skyrim except the shadows
- I did not modify the FOV, it works great
- I did not use the special .dll kicking around online, I use the ones packaged with vireio.
This is such an amazing tool. Skyrim is by far my favorite rift experience to date. thanks everyone.
I'll also add for those reading up on getting skyrim working, that I did not need to do any of the tweaks listed online for skyrim except the shadows
- I did not modify the FOV, it works great
- I did not use the special .dll kicking around online, I use the ones packaged with vireio.
This is such an amazing tool. Skyrim is by far my favorite rift experience to date. thanks everyone.