Panasonic's prototype Micro Four Thirds 3D lens and body

Find a good article? Got a news story to share? VR, AR, 3D...it's all good! No self promotion please.
Post Reply
User avatar
Silversurfer
Golden Eyed Wiseman! (or woman!)
Posts: 1405
Joined: Fri Jan 18, 2008 6:23 pm
Location: United Kingdom

Panasonic's prototype Micro Four Thirds 3D lens and body

Post by Silversurfer »

Image

And here it is, Panasonic's prototype G-series micro-four-thirds shooter with new interchangeable 3D lens. We caught the pair hanging out at IFA with nary a soul around to take notice. Too bad for them, good for you if you've made the jump to a panny MFT as the lens will ultimately be compatible with your Lumix G micro system... probably -- unfortunately, Panasonic isn't saying which cams will be eligible for the software update. From the sound of it, the whole kit will get official in just a few week at Photokina with a new G-series body playing host to the new 3D lens. Here in Berlin, however, we've got a G2 body with an updated 3D image processing system doing the dirty work. Nevertheless, it was fully functional and produced a reasonable 3D image with plenty of pop that was ready to view on a brand new Panasonic 3D television. Come on, a 3D televsion is nothing without 3D content. Sneaky Panasonic, sneaky.
Gallery: Panasonic's prototype

Image

Image

Image

Image

Image

Image

http://www.engadget.com/2010/09/03/pana ... dy-arrive/" onclick="window.open(this.href);return false;
Got a release or 3D news story to share? Email press@mtbs3D.com, and we'll put it up!

Image
User avatar
cybereality
3D Angel Eyes (Moderator)
Posts: 11407
Joined: Sat Apr 12, 2008 8:18 pm

Re: Panasonic's prototype Micro Four Thirds 3D lens and body

Post by cybereality »

Have fun taking pictures of ant colonies!
User avatar
BlackShark
Certif-Eyable!
Posts: 1156
Joined: Sat Dec 22, 2007 3:38 am
Location: Montpellier, France

Re: Panasonic's prototype Micro Four Thirds 3D lens and body

Post by BlackShark »

Not necessarely ant colonies. Anything up to a few metres should look good in 3D. You do not need 6.5cm separation to shoot close-ups, in order to get a good picture that does not hurt the viewer's eyes you'd actually need to use smaller separations.
Passive 3D forever !
DIY polarised dual-projector setup :
2x Epson EH-TW3500 (2D 1080p)
Xtrem Screen Daylight 2.0, for polarized 3D
3D Vision gaming with signal converter : VNS Geobox 501
Post Reply

Return to “User Contributed Immersive Technology News & Announcements”