iZ3D 1.07.0027 Beta Drivers Available on MTBS!
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
iZ3D 1.07.0027 Beta Drivers Available on MTBS!
iZ3D's 1.07.0027 Beta Drivers are out! You can get them in the MTBS Downloads section HERE:
http://www.mtbs3d.com/dloads/index.php? ... egory&id=8
Make sure you are registered on MTBS or you won't be able to get to the file. Registration is free and instantaneous!
These drivers include iZ3D, anaglyph, and dual output support (i.e. HEAD MOUNTED DISPLAY, people!)
Post your results HERE!
Regards,
Neil
http://www.mtbs3d.com/dloads/index.php? ... egory&id=8
Make sure you are registered on MTBS or you won't be able to get to the file. Registration is free and instantaneous!
These drivers include iZ3D, anaglyph, and dual output support (i.e. HEAD MOUNTED DISPLAY, people!)
Post your results HERE!
Regards,
Neil
Last edited by Neil on Wed May 21, 2008 1:55 pm, edited 1 time in total.
- LukePC1
- Golden Eyed Wiseman! (or woman!)
- Posts: 1387
- Joined: Wed May 16, 2007 11:30 am
- Location: Europe
- Contact:
Nice indeed... I can't get HMD to run
Well it works for the first monitor - the view shifts to the side, but I can't get it to display anything on the next monitor. I tried to get output to 2 different monitors to ... test the driver crosseyed. I set my nvidia controll panel to 1) single, Clone, and horizontal stretch.
It won't change anything... will I have to use the windows settings or did I find the first bug
Well it works for the first monitor - the view shifts to the side, but I can't get it to display anything on the next monitor. I tried to get output to 2 different monitors to ... test the driver crosseyed. I set my nvidia controll panel to 1) single, Clone, and horizontal stretch.
It won't change anything... will I have to use the windows settings or did I find the first bug
Play Nations at WAR with this code to get 5.000$ as a Starterbonus:
ayqz1u0s
http://mtbs3d.com/naw/" onclick="window.open(this.href);return false;
AMD x2 4200+ 2gb Dualchannel
GF 7900gs for old CRT with Elsa Revelator SG's
currently 94.24 Forceware and 94.24 Stereo with XP sp2!
ayqz1u0s
http://mtbs3d.com/naw/" onclick="window.open(this.href);return false;
AMD x2 4200+ 2gb Dualchannel
GF 7900gs for old CRT with Elsa Revelator SG's
currently 94.24 Forceware and 94.24 Stereo with XP sp2!
- Likay
- Petrif-Eyed
- Posts: 2913
- Joined: Sat Apr 07, 2007 4:34 pm
- Location: Sweden
Iz3d drivers works with dual view in the nv driver. Be sure to have that.
Great work iz3d team. I'll try this the first thing with dual projectors! Thanks!!!!
edit: Works fine with dual projectors. Tested tombraider legend with next generation content and it looks really great (7900gt). Anniversary and flat out2 also works on the big rig. Tomorrow changing to the 8800gtx for a blast with newer games.
cheers
Great work iz3d team. I'll try this the first thing with dual projectors! Thanks!!!!
edit: Works fine with dual projectors. Tested tombraider legend with next generation content and it looks really great (7900gt). Anniversary and flat out2 also works on the big rig. Tomorrow changing to the 8800gtx for a blast with newer games.
cheers
Last edited by Likay on Wed Apr 23, 2008 4:12 pm, edited 3 times in total.
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
- android78
- Certif-Eyable!
- Posts: 990
- Joined: Sat Dec 22, 2007 3:38 am
From the manual, I see that there is an option for Side-By-Side as part of the installation. Does this mean you can use a regular monitor in side-by side mode and use the cross eyed method? ... or is this just for generating the screen captures?
Also, if you can play games with side-by-side, what output method would you use for this?
Also, if you can play games with side-by-side, what output method would you use for this?
-
- Certif-Eyed!
- Posts: 504
- Joined: Mon Apr 16, 2007 11:36 pm
- Location: San Diego, California
- Contact:
Side by side is the HMD mode, it outputs to two different inputs, one screen on each input. Not two on one. Works for Projectors, HMD devices, etc. Creates two seperate images on two different outputs to generate the 3D,android78 wrote:From the manual, I see that there is an option for Side-By-Side as part of the installation. Does this mean you can use a regular monitor in side-by side mode and use the cross eyed method? ... or is this just for generating the screen captures?
Also, if you can play games with side-by-side, what output method would you use for this?
So, theoretically it may work for setting two monitors side-by-side for crosseyed.
LukePC, as mentioned you must use Dual View mode. Stretch is not the same, neither is Clone
It should be under something that says something along the lines of: Show each monitor separately(Dual View)
Also, please note that upon first use of HMD, or OpenGL you have 30 days for trial, then you wil have to activate.
As stated on the MTBS homepage, purchase plans will be available some time soon (Before the trial period it up)
So don't set your clocks ahead
Hope you enjoy!
-
- One Eyed Hopeful
- Posts: 4
- Joined: Thu Mar 20, 2008 5:41 pm
-
- One Eyed Hopeful
- Posts: 5
- Joined: Tue Apr 15, 2008 7:00 pm
-
- Binocular Vision CONFIRMED!
- Posts: 287
- Joined: Sat Nov 10, 2007 7:45 am
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
-
- Two Eyed Hopeful
- Posts: 69
- Joined: Thu Mar 22, 2007 8:31 pm
- Location: Bavaria
Tested it with two "problem-games": Test Drive Unlimited and Richard Burns Rally
Both are running without any problems.
Is there a way to have both drivers - nvidia and iz3d (with iz3d, the nv-driver wasn´t
working anymore - had to remove iz3d)? ...would be nice to use nv for dx7 and gl.
Now, i realy can´t wait for the page flipping version!
Have not tested 'auto-focus'...
Both are running without any problems.
Is there a way to have both drivers - nvidia and iz3d (with iz3d, the nv-driver wasn´t
working anymore - had to remove iz3d)? ...would be nice to use nv for dx7 and gl.
Now, i realy can´t wait for the page flipping version!
Have not tested 'auto-focus'...
-
- Binocular Vision CONFIRMED!
- Posts: 287
- Joined: Sat Nov 10, 2007 7:45 am
Thanks, Neil.Neil wrote:It is supposed to let you choose a setting, and as you play the game, when there are major camera angle changes, the drivers should compensate so it always looks good.
I'm not having much success with this yet - anyone else having results to report?
Regards,
Neil
In HL2, I turned on auto-focus and wandered around in an outside environment for a few minutes. Didn't notice anything at all.
-
- Certif-Eyed!
- Posts: 504
- Joined: Mon Apr 16, 2007 11:36 pm
- Location: San Diego, California
- Contact:
Auto convergence works best for 3rd person games, where the convergence point is the main item to be in focus.
For instance, in WoW, if you zoom in real close, adjust 3D settings, then set auto on, and zoom out, it corrects itself real well so your character doesn't double.
And Hugo, it is best to only run either iZ3D or Nvidia.
For instance, in WoW, if you zoom in real close, adjust 3D settings, then set auto on, and zoom out, it corrects itself real well so your character doesn't double.
And Hugo, it is best to only run either iZ3D or Nvidia.
- warface
- One Eyed Hopeful
- Posts: 43
- Joined: Tue Mar 06, 2007 11:41 pm
- Location: San Diego, CA
- Contact:
Your trial period will reset when the 1.08 Final Release version is released, so it's not 30 days from today.....it's 30 days from the release of 1.08FinalVersion.Welder wrote: Also, please note that upon first use of HMD, or OpenGL you have 30 days for trial, then you wil have to activate.
As stated on the MTBS homepage, purchase plans will be available some time soon (Before the trial period it up)
So don't set your clocks ahead
Hope you enjoy!
- warface
- One Eyed Hopeful
- Posts: 43
- Joined: Tue Mar 06, 2007 11:41 pm
- Location: San Diego, CA
- Contact:
Auto-convergence is a new area for all of us. It is not very simple to succeed at; however, it is meant to be somewhat subtle. You should almost not even think about it after a while....but to really test it, you'll need to go out of your way to see what it does.Mel wrote:Thanks, Neil.Neil wrote:It is supposed to let you choose a setting, and as you play the game, when there are major camera angle changes, the drivers should compensate so it always looks good.
I'm not having much success with this yet - anyone else having results to report?
Regards,
Neil
In HL2, I turned on auto-focus and wandered around in an outside environment for a few minutes. Didn't notice anything at all.
If you have a weapon that has a zoom feature, then you should see the front sight change it's own convergence on the screen. Like Welder was saying, if you have a third person game, and you zoom in on your player, the convergence should change on it's own.
We need your feedback on this feature. I'm sure it could use its improvements, so don't hold back.
-
- One Eyed Hopeful
- Posts: 23
- Joined: Sat Mar 29, 2008 12:08 pm
Seperation less than 0.13%
Is there a way to reduce the stereo separation steps to less than 0.13% something like 0.013% would be much better. does anyone know where these settings are stored? registry? I have a lot of VR projects in wich the 3D effect is way too much and I don't want to change the camera settings for each project we did the last few years.
Thanks in advance
Maart
Thanks in advance
Maart
-
- Sharp Eyed Eagle!
- Posts: 390
- Joined: Sun Jun 17, 2007 4:21 pm
Hi, maart!
This is stored inside code - but it is possible to do this - we did it Google Earth - pls contact me through info@iz3d.com with subject "iZ3D stereobase step scale" about your applications - may be we can do something.
This is stored inside code - but it is possible to do this - we did it Google Earth - pls contact me through info@iz3d.com with subject "iZ3D stereobase step scale" about your applications - may be we can do something.
- cirk2
- Certif-Eyed!
- Posts: 521
- Joined: Fri May 11, 2007 10:13 am
They have left and right... The picture is only transmitted via Pagefliping, So you can use it with the Shutterglasses Settings in Nvidia driver. Or you are using the Native 3D driver from vuzix, then the Page Flipping singnal cames over usb, but the picture is still pageflippedBlackQ wrote:Hi, Canilash!
Vuzix glasses from our experience did not provide real 3D - they have some image manipulation to show 3D, but real left and right don't go into this device.
-
- Sharp Eyed Eagle!
- Posts: 390
- Joined: Sun Jun 17, 2007 4:21 pm
Hi, cirk2!
Am I correct that they:
1. send left and right after each other
2. buffer them somewhere
3. show them for left and right eye at the same time?
Then few specific question for understanding:
1. resolution and frequency? VGA has very limited bandwidth - count: 1680*1050*32bit*60Hz = 3.4Gbs...
2. memory for buffering - do they have it in glasses?
3. Any API do they have?
Am I correct that they:
1. send left and right after each other
2. buffer them somewhere
3. show them for left and right eye at the same time?
Then few specific question for understanding:
1. resolution and frequency? VGA has very limited bandwidth - count: 1680*1050*32bit*60Hz = 3.4Gbs...
2. memory for buffering - do they have it in glasses?
3. Any API do they have?
- cirk2
- Certif-Eyed!
- Posts: 521
- Joined: Fri May 11, 2007 10:13 am
to 1: Resolution is up to 1024x768 at 60Hz. Native display res is 640x480 (x2). The images in 3D mode are transfered after each other (1L,1R,2L,2R,3L,3R). The Information wich side is next comes via usb (see SDK) or the DDC-Singnal (Nvidia Driver).BlackQ wrote: Then few specific question for understanding:
1. resolution and frequency? VGA has very limited bandwidth - count: 1680*1050*32bit*60Hz = 3.4Gbs...
2. memory for buffering - do they have it in glasses?
3. Any API do they have?
to 2: The current picture for each eye is hold in the glasses, the newer (Prerendered) Frames are in the video card
to 3: Yes they have: http://www.vuzix.com/iwear/support_down ... ivers.html
-
- Sharp Eyed Eagle!
- Posts: 390
- Joined: Sun Jun 17, 2007 4:21 pm
Hi, cirk2!
Thank you for very useful information - we are not supporting any page flipping at the moment, but we are thinking how to do it and when. We started DX10 development for version 2.00, but for 1.xx generation of driver we may try to implement some flipping form.
Now we can run only glasses with separate left and right input (HMD mode)
Thank you for very useful information - we are not supporting any page flipping at the moment, but we are thinking how to do it and when. We started DX10 development for version 2.00, but for 1.xx generation of driver we may try to implement some flipping form.
Now we can run only glasses with separate left and right input (HMD mode)
-
- One Eyed Hopeful
- Posts: 23
- Joined: Sat Mar 29, 2008 12:08 pm
sepperation steps
Dear BlackQ
I noticed that in some games a lower sepperation step than 0.13% could be usefull, I just sent the e-mail to IZ3D I hope you guys can help me out before the next release. The driver seems to work fine with shaders! man this is so awesome, it will look amazing! I will post some screenshots here when I can get a nice 3D effect out of the drivers
Thanks in advance
Maart
I noticed that in some games a lower sepperation step than 0.13% could be usefull, I just sent the e-mail to IZ3D I hope you guys can help me out before the next release. The driver seems to work fine with shaders! man this is so awesome, it will look amazing! I will post some screenshots here when I can get a nice 3D effect out of the drivers
Thanks in advance
Maart
-
- One Eyed Hopeful
- Posts: 1
- Joined: Wed Jan 30, 2008 11:55 am
New drivers
Finally a solution that worked with my setup. I've not given then a huge runthrough but after downloading and trying them for half an hour I had to post. I'm using a 19inch acer monitor, amd dual core 3.8 and nividia 7950 overclocked card, vista 64 bit version I quickly tried two games in anaglyph mode first biosock, it worked but the limits of anaplyph shows in this game when bright objects are displayed on a dark background ghosting is a huge broblem otherwise it worked with a slight framerate drop. I tried DTA san andreas and it worked great except I could nto get the mouse to work, may have been somethign that changed in a setting I have not played this game in about a year. Driving was definately fun. I'll have to hook up my projectors as soon as I get the polarized film I ordered. I'm off to play some IL2 hopefully with the same effect.
-
- Two Eyed Hopeful
- Posts: 51
- Joined: Tue Jan 01, 2008 10:49 pm
-
- One Eyed Hopeful
- Posts: 28
- Joined: Sat Dec 22, 2007 3:38 am
Hi guys,
I sadly have the same problem as LukePC has/had. One Display shifts to stereo the other one wont (HMD mode).
When I set it to clone mode, both monitors shift, but its the same picture (side) ... actually the may it should be in clone mode
I am using Vista 32bit 8800GTS 512. Monitors are configured to dualview (configure each monitor separately).
I tried all installing combinations like IZ3D + HMD + Side-by-Side, only HMD, only Side-by-Side ... (btw why is there an option for side-by-side?
It is neither working nor would it be different to HMD right?) and all output mode I have with vista (dualview, clone ... there is no stretch mode)
What am I doing wrong? I so want to get this to work
Is it maybe Vista with its directx 10???
Please help ... I waited so long for this day.
Thanks Antony
I sadly have the same problem as LukePC has/had. One Display shifts to stereo the other one wont (HMD mode).
When I set it to clone mode, both monitors shift, but its the same picture (side) ... actually the may it should be in clone mode
I am using Vista 32bit 8800GTS 512. Monitors are configured to dualview (configure each monitor separately).
I tried all installing combinations like IZ3D + HMD + Side-by-Side, only HMD, only Side-by-Side ... (btw why is there an option for side-by-side?
It is neither working nor would it be different to HMD right?) and all output mode I have with vista (dualview, clone ... there is no stretch mode)
What am I doing wrong? I so want to get this to work
Is it maybe Vista with its directx 10???
Please help ... I waited so long for this day.
Thanks Antony
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
-
- One Eyed Hopeful
- Posts: 28
- Joined: Sat Dec 22, 2007 3:38 am
Thanks for the fast answers.
I tried Crysis (dx10 under vista I guess) and Call of Duty 4 (dx9 i think) and Rainbow Six Vegas
which is dx9, right?
I put both monitors on 1280x1024x85Hz.
How do I set a game to run with whatever dx version I want it to run? I thought every dx9 game
would run under dx9 on vista automatically.
(I read that dx9 and dx10 are not downwards compatible like everyone thinks, thats why you have
to install a dx9 version under vista too; although dxdiag shows dx10 still)
if vista is the problem I gladly change back to xp for s3d!
thanks again
Antony
I tried Crysis (dx10 under vista I guess) and Call of Duty 4 (dx9 i think) and Rainbow Six Vegas
which is dx9, right?
I put both monitors on 1280x1024x85Hz.
How do I set a game to run with whatever dx version I want it to run? I thought every dx9 game
would run under dx9 on vista automatically.
(I read that dx9 and dx10 are not downwards compatible like everyone thinks, thats why you have
to install a dx9 version under vista too; although dxdiag shows dx10 still)
if vista is the problem I gladly change back to xp for s3d!
thanks again
Antony
-
- Two Eyed Hopeful
- Posts: 73
- Joined: Sun Oct 28, 2007 9:13 pm
Hey!!! I just tried it for the first time (first time I've used anaglyph glasses in years!)--it works great for Condemned: Criminal Origins (better game than FEAR in some ways).
A few questions:
With the new beta driver, how do I change normal anaglpyh mode to black and white mode or optimized mode? The Config.XML file is missing in the program files folder, whereas I could edit it in 1.07 drivers.
I have red/cyan glasses and the red bleeds through the cyan lenses a lot when there is contrast against dark background (almost too much for me), so did anybody actually confirm that the darker red/blue is better than red/cyan glasses?
Perhaps IZ3D could try adding a mode for red/blue glasses? I'm confused because one IZ3D guy is saying that red/blue is better, and the other IZ3D worker is saying that red/cyan is better???
FYI: when I set auto-focus (auto convergence) in the game, it halves the frame rates while I did not initially see any difference (not completely sure, though).
And bring on the page-flipping shutterglasses mode!!!!!!!!!!!!!! (Show Nvidia how much better you can do it!) I'd be willing to pay $20-30 for working, bug-free DDC-VGA drivers that work with newer video cards. And another $20-30 if it also works with ATI cards!
A few questions:
With the new beta driver, how do I change normal anaglpyh mode to black and white mode or optimized mode? The Config.XML file is missing in the program files folder, whereas I could edit it in 1.07 drivers.
I have red/cyan glasses and the red bleeds through the cyan lenses a lot when there is contrast against dark background (almost too much for me), so did anybody actually confirm that the darker red/blue is better than red/cyan glasses?
Perhaps IZ3D could try adding a mode for red/blue glasses? I'm confused because one IZ3D guy is saying that red/blue is better, and the other IZ3D worker is saying that red/cyan is better???
FYI: when I set auto-focus (auto convergence) in the game, it halves the frame rates while I did not initially see any difference (not completely sure, though).
And bring on the page-flipping shutterglasses mode!!!!!!!!!!!!!! (Show Nvidia how much better you can do it!) I'd be willing to pay $20-30 for working, bug-free DDC-VGA drivers that work with newer video cards. And another $20-30 if it also works with ATI cards!
Last edited by Bo_Fox on Thu Apr 24, 2008 1:02 pm, edited 1 time in total.
8800GTX, 24" CRT (Sony GDM-FW900)
i7 920 @ 3.7GHz, Foxconn Bloodrage, WinXP-32 and Vista x64 SP2
3D shutters, 181.00 Forceware +162.50 S3D for WinXP
Other rig: 4870 1GB, i7 920 @ 4GHz, DFI T3eH8
24" LCD + IZ3D anaglyph, WinXP-32 and Win7 x64
i7 920 @ 3.7GHz, Foxconn Bloodrage, WinXP-32 and Vista x64 SP2
3D shutters, 181.00 Forceware +162.50 S3D for WinXP
Other rig: 4870 1GB, i7 920 @ 4GHz, DFI T3eH8
24" LCD + IZ3D anaglyph, WinXP-32 and Win7 x64
- staticbuddha
- Cross Eyed!
- Posts: 150
- Joined: Wed Apr 23, 2008 9:14 am
- Location: England, Dartford
analygh - Punkbuster dosnt like it
Hi,
Just tried the IZ3D driver in COD Multiplayer and keep getting kicked sayng: use of unknown driver
guessing this maybe for dual screens etc??? anyone else getting this problem ?
Just tried the IZ3D driver in COD Multiplayer and keep getting kicked sayng: use of unknown driver
guessing this maybe for dual screens etc??? anyone else getting this problem ?
-
- One Eyed Hopeful
- Posts: 28
- Joined: Sat Dec 22, 2007 3:38 am
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
What is happening is Punk Buster is falsely declaring the iZ3D driver as a hack/cheat. Some games work, others don't.
iZ3D is working on a new architecture to get around this which we should see in version 2.0.
However, from PB's point of view, this is easy to get around - but there needs to be a willingness on their end.
Regards,
Neil
iZ3D is working on a new architecture to get around this which we should see in version 2.0.
However, from PB's point of view, this is easy to get around - but there needs to be a willingness on their end.
Regards,
Neil
- KindDragon
- Cross Eyed!
- Posts: 108
- Joined: Sat Mar 10, 2007 4:05 am
- Location: Russia
Select Anaglyph, and set OutpudMode to 1 or 2. Config.xml now located inBo_Fox wrote: With the new beta driver, how do I change normal anaglpyh mode to black and white mode or optimized mode? The Config.XML file is missing in the program files folder, whereas I could edit it in 1.07 drivers.
XP: X:\Documents and Settings\All Users\Application Data\iZ3D Driver
Vista: X:\Program Data\Application Data\iZ3D Driver
Red/cyan is better. We Sometimes mistakenly called red / blueBo_Fox wrote: Perhaps IZ3D could try adding a mode for red/blue glasses? I'm confused because one IZ3D guy is saying that red/blue is better, and the other IZ3D worker is saying that red/cyan is better???
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact: