IZ3D and Fresnel Lenses.
-
- Cross Eyed!
- Posts: 131
- Joined: Sat Dec 22, 2007 3:38 am
IZ3D and Fresnel Lenses.
I realise that it is possible to hook up 2 of these monitors using 2 cards in non sli config, and then extend 2nd monitor to primary display. However, staring at a large bezel is the downside. 2 fresnel lenses would eliminate the bezel and provide a seamless image. Has anyone tested if 3D still works with polarised and fresnel lenses? 8)
If that is not possible, does nvidia support 2 screens in 3D, either with 1 card or 2?
Thanks in advance.
If that is not possible, does nvidia support 2 screens in 3D, either with 1 card or 2?
Thanks in advance.
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: IZ3D and Fresnel Lenses.
While i have not tested i believe a fresnel lens will muck up the polarization on the iz2d and not work. The nvidia solutions on the other hand should be fine.
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
- yuriythebest
- Petrif-Eyed
- Posts: 2476
- Joined: Mon Feb 04, 2008 12:35 pm
- Location: Kiev, ukraine
Re: IZ3D and Fresnel Lenses.
however it's possible to use th2g + iz3d
Oculus Rift / 3d Sucks - 2D FTW!!!
-
- Cross Eyed!
- Posts: 131
- Joined: Sat Dec 22, 2007 3:38 am
Re: IZ3D and Fresnel Lenses.
Th2go and 3d? That would be awesome. However, welder has never explained how he achieved it.
- The_Doctor
- Binocular Vision CONFIRMED!
- Posts: 294
- Joined: Sat Jan 19, 2008 12:00 am
Re: IZ3D and Fresnel Lenses.
The nvidia stuff does not work with more than one monitor in 3d.
-
- Binocular Vision CONFIRMED!
- Posts: 211
- Joined: Wed Mar 21, 2007 3:22 am
Re: IZ3D and Fresnel Lenses.
Actually it does work with a th2go.
EDIT: That is, with CRT or DLP projectors with high enough refresh. Dunno about checkerboard solutions and such.
EDIT: That is, with CRT or DLP projectors with high enough refresh. Dunno about checkerboard solutions and such.
Current Rig: Intel i7 920 @ 4.0GHz, 6 GB ram, Geforce GTX670 -> Nvidia 3D Vision on LG 47LM615S (interlaced, spoofing Zalman EDID) + Oculus Rift
Control Peripherals: Novint Falcon, Razer Hydra, P5 Glove, XBOX 360 Controller, Wiimote, Saitek X52 Pro (flight control system), Logitech G27 (racing wheel), Logitech G15 (keyboard), Razer Naga Molten Edition (mouse)
Control Peripherals: Novint Falcon, Razer Hydra, P5 Glove, XBOX 360 Controller, Wiimote, Saitek X52 Pro (flight control system), Logitech G27 (racing wheel), Logitech G15 (keyboard), Razer Naga Molten Edition (mouse)
-
- Cross Eyed!
- Posts: 131
- Joined: Sat Dec 22, 2007 3:38 am
Re: IZ3D and Fresnel Lenses.
Not the digital version as the max refresh rate is circa 59hz. Not sure about the analog though, anyone?
I am thinking that 2 X 120hz monitors plugged into both ports on vid card, expanded desktop mode. Would that not give s3d? If not I am very surprised that nvidia never thought about that. I could have 2 X PJ's side by side for instance.
I am thinking that 2 X 120hz monitors plugged into both ports on vid card, expanded desktop mode. Would that not give s3d? If not I am very surprised that nvidia never thought about that. I could have 2 X PJ's side by side for instance.
-
- Certif-Eyed!
- Posts: 504
- Joined: Mon Apr 16, 2007 11:36 pm
- Location: San Diego, California
- Contact:
Re: IZ3D and Fresnel Lenses.
Simply plugged it in, and changed a setting in our driver config that we added specifically for this. I'm sure I could find it out for you again.. but once again, I can't officially support this. So, if you wanted to spend the money for 2 TH2GO and 3 monitors, you can. But I can't make any guarantee that it would indeed work well, or at all.slipstream wrote:Th2go and 3d? That would be awesome. However, welder has never explained how he achieved it.
-
- Cross Eyed!
- Posts: 131
- Joined: Sat Dec 22, 2007 3:38 am
Re: IZ3D and Fresnel Lenses.
Hi Welder, thanks for your input. I already have TH2GO, so its a start. If you could explain the process in detail for me I would happily take the risk. Thanks so far.
-
- Golden Eyed Wiseman! (or woman!)
- Posts: 1644
- Joined: Fri Aug 21, 2009 9:06 pm
Re: IZ3D and Fresnel Lenses.
I tried a fresnel, screws up polarization, sadly.
-
- Sharp Eyed Eagle!
- Posts: 381
- Joined: Mon Aug 09, 2010 6:08 pm
- Location: Houston
Re: IZ3D and Fresnel Lenses.
What'd you try? Cybereality said it worked for him.PalmerTech wrote:I tried a fresnel, screws up polarization, sadly.
- cybereality
- 3D Angel Eyes (Moderator)
- Posts: 11407
- Joined: Sat Apr 12, 2008 8:18 pm
Re: IZ3D and Fresnel Lenses.
Fresnel works on the Zalman at least. Can't speak for IZ3D.
- cadcoke5
- Binocular Vision CONFIRMED!
- Posts: 210
- Joined: Mon May 24, 2010 8:43 pm
- Location: near Lancaster, PA USA
Re: IZ3D and Fresnel Lenses.
A recent discussion on Head Mounted Displays talked about this issue, with the report that Fresnel's didn't mess up polarization.
Re: Cyber's Crazy DIY HMD Project
http://www.mtbs3d.com/phpBB/viewtopic.p ... 410#p60410" onclick="window.open(this.href);return false;
Joe Dunfee
Re: Cyber's Crazy DIY HMD Project
http://www.mtbs3d.com/phpBB/viewtopic.p ... 410#p60410" onclick="window.open(this.href);return false;
Joe Dunfee