Hello all!
I have been searching the forum for several weeks in order to pick up a projector for the presentation of 3d objects in 1080p resolution. I work as a surveyor and draw plans using 3d vision stereo (quad-buffered stereo). I have a projector that works great - benq w710st (3d vision ready). It works exclusively with Nvidia emitter and Nvidia 3d vision glasses, but it only outputs 720p 120hz resolution.
Can you please tell me if there are projectors that can work with 3d vision glasses and an emitter in 1080p 120hz resolution?
After studying the forum, as far as I understand, projectors that support 3d vision in 1080p work exclusively with dlp glasses - such as optoma uhd40/50, hd27hdr, 1080HDR - but the question arises whether these projectors will work correctly with 3d vision glasses?
Thanks everyone! I apologize if I missed the answer on the forum and created a new topic.
3D Vision-compatible Projectors 1080p 120hz (with 3d vision glasses)
-
- One Eyed Hopeful
- Posts: 2
- Joined: Fri Feb 03, 2023 11:06 pm
-
- Petrif-Eyed
- Posts: 2398
- Joined: Thu Mar 29, 2012 4:49 pm
Re: 3D Vision-compatible Projectors 1080p 120hz (with 3d vision glasses)
...
Last edited by 3DNovice on Fri Mar 15, 2024 10:21 am, edited 1 time in total.
-
- One Eyed Hopeful
- Posts: 2
- Joined: Fri Feb 03, 2023 11:06 pm
Re: 3D Vision-compatible Projectors 1080p 120hz (with 3d vision glasses)
Thanks for the answer.
When I connect the projector (benq w710st) via hdmi and after the 3d vision driver sees the device (3d vision ready), a menu appears in the panel:
- Stereoscoptic 3D (where can i enable stereoscopic mode)
In the 3d parameter control, generic active stereo (with Nvidia 3D vision).
It seems to me that without edid substitution, in the 4k projector I am looking for (1080p 120hz) I will not see 3d vision - Stereoscoptic 3D in the driver (because the system will not see the official Nvidia 3d vision ready compatibility) and it will not be able to work correctly with the driver.
The most important thing is that it is the 3d vision glasses that blink to the beat of the given pc, even frames are shown in one eye, odd frames are shown in the other - the 3d vision emitter is responsible for this. And it is impossible to use other glasses in this case.
Has anyone managed to play games with 3d vision glasses and 3d vision emitter on any projector at 1080p 120hz? If yes, please tell me the model of the projector.
Thank you very much everyone.
When I connect the projector (benq w710st) via hdmi and after the 3d vision driver sees the device (3d vision ready), a menu appears in the panel:
- Stereoscoptic 3D (where can i enable stereoscopic mode)
In the 3d parameter control, generic active stereo (with Nvidia 3D vision).
It seems to me that without edid substitution, in the 4k projector I am looking for (1080p 120hz) I will not see 3d vision - Stereoscoptic 3D in the driver (because the system will not see the official Nvidia 3d vision ready compatibility) and it will not be able to work correctly with the driver.
The most important thing is that it is the 3d vision glasses that blink to the beat of the given pc, even frames are shown in one eye, odd frames are shown in the other - the 3d vision emitter is responsible for this. And it is impossible to use other glasses in this case.
Has anyone managed to play games with 3d vision glasses and 3d vision emitter on any projector at 1080p 120hz? If yes, please tell me the model of the projector.
Thank you very much everyone.
- Vas22
- One Eyed Hopeful
- Posts: 26
- Joined: Fri May 01, 2020 12:41 am
Re: 3D Vision-compatible Projectors 1080p 120hz (with 3d vision glasses)
Add Optoma UHD65 to the list of 3D vision compatible projector as I've described here near the end of the page - https://www.avsforum.com/threads/optoma ... 98#replies.
Can only confirm that 3d vision works fine at 1080p/120hz with the C15 firmware and with dlp link glasses, don't know about previous firmware versions.
Can't find the old Optoma UHD40 related thread hence why I'm posting here.
Can only confirm that 3d vision works fine at 1080p/120hz with the C15 firmware and with dlp link glasses, don't know about previous firmware versions.
Can't find the old Optoma UHD40 related thread hence why I'm posting here.
Windows 10, 9700k 5ghz, 4000mhz cl19 dual rank 4x8gb Patriot Viper, 980ti oc, Benq xl2411, Optoma uhd65 4k projector, Asus GL702ZC laptop