3d Elsa Revelator using on MSI Geforce 7300 LE

Discussion of legacy stereoscopic 3D gaming hardware and software (e.g. NVIDIA XP stereoscopic 3D drivers).
Post Reply
User avatar
bigmongostyler
One Eyed Hopeful
Posts: 9
Joined: Sat Dec 22, 2007 3:38 am

3d Elsa Revelator using on MSI Geforce 7300 LE

Post by bigmongostyler »

Hello guys,
i´ve got a question..

I have bought an "MSI Geforce 7300 LE"
http://www.pramool.com/auctpic9/added/5 ... 527703.jpg" onclick="window.open(this.href);return false;
Can i use this graphic card with an DVI to VGA adapter and the Elsa Revelator Glasses?!
Ore is the adapter an problem?!


MFG
BigMongostyler =)
Image
User avatar
cybereality
3D Angel Eyes (Moderator)
Posts: 11406
Joined: Sat Apr 12, 2008 8:18 pm

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by cybereality »

Yeah, that should be no problem. Just make sure you're on WindowsXP and use old drivers (93.31 is good I believe).
User avatar
bigmongostyler
One Eyed Hopeful
Posts: 9
Joined: Sat Dec 22, 2007 3:38 am

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by bigmongostyler »

okay that's great,
because i have anywhere read that if you you use an adapter it wouldnt work for stereo 3d,
with elsa glasses..
The graphic card is currently on the way to me,
but I have windowsxp on it.
And these "93.31" driver combi i have to test it.

Thanks for this info ;)
Image
User avatar
bigmongostyler
One Eyed Hopeful
Posts: 9
Joined: Sat Dec 22, 2007 3:38 am

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by bigmongostyler »

Hey,
i got a problem...
I have got my "MSI Geforce 7300 LE" on ebay.
The card got only "DVI" output,
i use an "DVI" to "VGA" adapter..

I have testet the driver combi

-ForceWare 93.71 (x86) WHQL
-ForceWare 91.31 Stereo Driver

and

-162.50_quadro_winxp2k_english_whql
-StereoE16250-[Guru3D.com]

I go to "Stereo" then "Enabled,
then comes the "Medical Test image"
in correkt 3d stereo.
If i put my "3D Elsa Revelator IR version" on,
nothing happened... :(
Baterry is okay, it´s new "CR2032 - 3 volt"
I have set
DDC VGA glasses (I0 Display) ore
Direkt 3pin DIN VESA Connect - Stereo Type
Where is the probelm..?!


My System:
System: WinXP 32bit
Processor: Amd Athlon 64 x2 Dual core 2,6 ghz x2
Motherboard: Abit Fatality SLI 32x
Graphic: Gforce 7300 LE
- http://www.pramool.com/auctpic9/added/5 ... 527703.jpg" onclick="window.open(this.href);return false;
RAM: 2048 mb ddr2 ram
Monitor: Philips 19" CRT Monitor who Supported 120hz@ 800x600 100hz@ 1024x768
Image
User avatar
Likay
Petrif-Eyed
Posts: 2913
Joined: Sat Apr 07, 2007 4:34 pm
Location: Sweden

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by Likay »

Afaik you can't mix older stereodrivers too much. When running 91.31 stereo you need 91.31 forceware as well. Sometimes it works anyway but it's safer matching the versions. The 162.50 can be run with newer driver what i know of. Since a while ago i ran 169.21fw+162.50 successfully.
Ps: The older stereodrivers (91.31 and up to around ~97.44) do NOT support mutliprocessor cpu's. Use nhancer or a dual boot with modified boot.ini to fix this!
Mb: Asus P5W DH Deluxe
Cpu: C2D E6600
Gb: Nvidia 7900GT + 8800GTX
3D:100" passive projector polarized setup + 22" IZ3D
Image
User avatar
bigmongostyler
One Eyed Hopeful
Posts: 9
Joined: Sat Dec 22, 2007 3:38 am

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by bigmongostyler »

i have do this what do you say me,
run single core over msconfig..
And use the driver combination

-ForceWare 91.31 Windows 2000|XP WHQL
-ForceWare 91.31 Stereo Driver

and many other combinations..

But no one would to start my 3d elsa glasses,
the glasses dooo nothing .. :?

Have i to buy new glasses ore what i can do...
I was so happy and now nothing works again :|
Image
User avatar
Dom
Diamond Eyed Freakazoid!
Posts: 824
Joined: Sun Oct 19, 2008 12:30 pm
Contact:

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by Dom »

Hi when my glasses would not turn on I used the ed.exe activator program from edimensional.com . The ddc option in nvidia control panel should turn your glasses on when in full screen only like in a game or stereoplayer. The ed.exe activator lets you enable the glasses on and off in any part of windows. To see the 3d effect in a game turn on ed activator and then push ctrl-t to turn on nvidia driver and should work in sync with your monitor. One thing to note is if your eyes are switched just press and holder the covergence button ctrl f5 and or ctrl f6 a long time until either way is for your right and left eyes corrected view.
http://www.cns-nynolyt.com/files/doms-systemspecs.html My System specs In HTML

Image

Cyberia on Youtube

__________________________________________________________________________________________
Image
User avatar
cybereality
3D Angel Eyes (Moderator)
Posts: 11406
Joined: Sat Apr 12, 2008 8:18 pm

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by cybereality »

It might be the converter or cable you are using. You need one that preserves the analog signal, so DVI-I is the best bet. Compare the image below:

Image
User avatar
bigmongostyler
One Eyed Hopeful
Posts: 9
Joined: Sat Dec 22, 2007 3:38 am

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by bigmongostyler »

I LOVE YOU "cybereality"
my problem is cleared the glasses run perfektly ! :D
juhuuuuuuuuuu yehaaaaa

im now on 3d stereo I LOVE IT ^xD


i usw now an "DVI-I DUAL LINK" adapter before i got an,
"DVI-A" adapter.
And i changed the monitor cable from new to old,
and its run! :D great thanks thanks thanks ! ;)
Image
User avatar
cybereality
3D Angel Eyes (Moderator)
Posts: 11406
Joined: Sat Apr 12, 2008 8:18 pm

Re: 3d Elsa Revelator using on MSI Geforce 7300 LE

Post by cybereality »

Glad I could be of help.
Post Reply

Return to “Nvidia Legacy Drivers”