I took the time to experiment with eyefinity gaming on 3 Zalman 22" passive monitors (sadly I don't own 3, but used it plus a couple of non 3d monitors to fill the set) and setup a 3x 1680x1050 eyefinity group.

I used iz3d's driver set to interlaced and took Dirt3 out for a spin trying the zalman on different parts of the group, and the 3d works across the whole set as expected. (Of course I had to put up with interlaced double vision on my non stereo monitors).









also at

http://imgur.com/a/hdUAn

Hi mm0zct!

That won't work (for 3D images). You need to upload your pictures to MTBS' 3D gallery, and then use the BBCODE provided (in the gallery) in the forums.

Nice try, though.

Regards,
Neil

Hi Neil,

I'm new to the forum's image posting so you caught me mid edit->preview cycle while trying to work it out. It should all be displayed nicely now

Still not working. You have to upload to mtbs' 3D gallery and use the coding there.

Here is an example:

Gallery source(Choose SHOW BBCODES) : http://www.mtbs3d.com/gallery/displayim ... 4&pid=4001

Forum result:



Regards,
Neil

Ah, the gallery complains that my images are too wide (the problem with eyefinity screenshots) so I'll fix it up tomorrow.

It's fixed now with 50% size reduced files, the imgur and attached files are full resolution for those that care, viewing it in the forum (interlaced anyway) seems to produce quite bad aliasing/undersampling problems with things like the gravel, so downloading and viewing fit to height (scrolling side to side) on your own setup might be best.

Looking good. Thanks for posting.