Portal Dual 180 WFOV Printing Case + Mobile Case!!

This is for discussion and development of non-commercial open source VR/AR projects (e.g. Kickstarter applicable, etc). Contact MTBS admins at customerservice@mtbs3d.com if you are unsure if your efforts qualify.
Post Reply
User avatar
Hannibalj2
Binocular Vision CONFIRMED!
Posts: 300
Joined: Sun May 26, 2013 2:45 pm

Portal Dual 180 WFOV Printing Case + Mobile Case!!

Post by Hannibalj2 »

Hello Everyone,

I have stated on my Portal Dual thread that I was going to start providing the work done on the HMD to the community. I am looking at the best way to post the software so other community coders or software developers can further it to use freely on any type of HMD for Dual Display like the Infiniteye and the Dual.

I hope that there are others in the community have interest on building their own ultra wide FOV Units. Here I am providing the
the file for printing. However it is in STEP file format. Later I will provide the file as STL.
The unit is rather large for the average 3d printer, so a large printed will be needed.

Below I am including pictures of the latest look of the Portal Dual Prototype. The unit was re-design to be as light as possible.
Some customisable elements were taken out from version 2 to reduce plastic.

Here is the link to download the printing file as STL.

Download Link: http://www.thingiverse.com/thing:287148

Cheers :)
You do not have the required permissions to view the files attached to this post.
Last edited by Hannibalj2 on Wed Apr 02, 2014 5:52 am, edited 3 times in total.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335

PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
User avatar
Hannibalj2
Binocular Vision CONFIRMED!
Posts: 300
Joined: Sun May 26, 2013 2:45 pm

Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!

Post by Hannibalj2 »

Here I am including the first Mobile Case for VR prototype I made.

Below are a few pictures of the prototype.

Download link: http://www.thingiverse.com/thing:287157

Specs: Galaxy Phone 5.7 inch Cellphone or similar type phones

Three (3) type of Eye Cups, 9 in total eye cups for printing.

Cheers 8-)
You do not have the required permissions to view the files attached to this post.
Last edited by Hannibalj2 on Tue Apr 01, 2014 9:23 pm, edited 2 times in total.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335

PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
User avatar
Hannibalj2
Binocular Vision CONFIRMED!
Posts: 300
Joined: Sun May 26, 2013 2:45 pm

Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!

Post by Hannibalj2 »

Here I am including the Second Mobile Case design. The Cellphone holders connection maybe be different rom version 1. It was made for 5.7 inch cell Phones same as version 1.

Download Link: http://www.thingiverse.com/thing:287175

Below are some pictures

Cheers 8-)
You do not have the required permissions to view the files attached to this post.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335

PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
User avatar
Hannibalj2
Binocular Vision CONFIRMED!
Posts: 300
Joined: Sun May 26, 2013 2:45 pm

Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!

Post by Hannibalj2 »

OK this is the 3rd and final variation of the Cell Phone case VR. All the files should include 3 sets of eye cups like the Rift.

Cel Phone size: 5.7 Inch


Download Link: http://www.thingiverse.com/thing:287183

Cheers 8-)
You do not have the required permissions to view the files attached to this post.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335

PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
geekmaster
Petrif-Eyed
Posts: 2708
Joined: Sat Sep 01, 2012 10:47 pm

Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!

Post by geekmaster »

This is a truly outstanding contribution to the community. Thank you kindly and sincerely for sharing such a valuable resource with us.

I hope this grows into a wonderful asset now that more of us can participate, standing on the shoulders of giants such as yourself.

I salute you, sir!
User avatar
Hannibalj2
Binocular Vision CONFIRMED!
Posts: 300
Joined: Sun May 26, 2013 2:45 pm

Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!

Post by Hannibalj2 »

geekmaster wrote:This is a truly outstanding contribution to the community. Thank you kindly and sincerely for sharing such a valuable resource with us.

I hope this grows into a wonderful asset now that more of us can participate, standing on the shoulders of giants such as yourself.

I salute you, sir!
Hello Geekmaster, thanks for the kind words. I hope this tokens can help anyone with their personal projects in which can benefit the community.

Thanks for all your advice!

Cheers :)
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335

PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
Post Reply

Return to “VR/AR Research & Development”