Hello Everyone,
I have stated on my Portal Dual thread that I was going to start providing the work done on the HMD to the community. I am looking at the best way to post the software so other community coders or software developers can further it to use freely on any type of HMD for Dual Display like the Infiniteye and the Dual.
I hope that there are others in the community have interest on building their own ultra wide FOV Units. Here I am providing the
the file for printing. However it is in STEP file format. Later I will provide the file as STL.
The unit is rather large for the average 3d printer, so a large printed will be needed.
Below I am including pictures of the latest look of the Portal Dual Prototype. The unit was re-design to be as light as possible.
Some customisable elements were taken out from version 2 to reduce plastic.
Here is the link to download the printing file as STL.
Download Link: http://www.thingiverse.com/thing:287148
Cheers
Portal Dual 180 WFOV Printing Case + Mobile Case!!
- Hannibalj2
- Binocular Vision CONFIRMED!
- Posts: 300
- Joined: Sun May 26, 2013 2:45 pm
Portal Dual 180 WFOV Printing Case + Mobile Case!!
You do not have the required permissions to view the files attached to this post.
Last edited by Hannibalj2 on Wed Apr 02, 2014 5:52 am, edited 3 times in total.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
- Hannibalj2
- Binocular Vision CONFIRMED!
- Posts: 300
- Joined: Sun May 26, 2013 2:45 pm
Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!
Here I am including the first Mobile Case for VR prototype I made.
Below are a few pictures of the prototype.
Download link: http://www.thingiverse.com/thing:287157
Specs: Galaxy Phone 5.7 inch Cellphone or similar type phones
Three (3) type of Eye Cups, 9 in total eye cups for printing.
Cheers
Below are a few pictures of the prototype.
Download link: http://www.thingiverse.com/thing:287157
Specs: Galaxy Phone 5.7 inch Cellphone or similar type phones
Three (3) type of Eye Cups, 9 in total eye cups for printing.
Cheers
You do not have the required permissions to view the files attached to this post.
Last edited by Hannibalj2 on Tue Apr 01, 2014 9:23 pm, edited 2 times in total.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
- Hannibalj2
- Binocular Vision CONFIRMED!
- Posts: 300
- Joined: Sun May 26, 2013 2:45 pm
Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!
Here I am including the Second Mobile Case design. The Cellphone holders connection maybe be different rom version 1. It was made for 5.7 inch cell Phones same as version 1.
Download Link: http://www.thingiverse.com/thing:287175
Below are some pictures
Cheers
Download Link: http://www.thingiverse.com/thing:287175
Below are some pictures
Cheers
You do not have the required permissions to view the files attached to this post.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
- Hannibalj2
- Binocular Vision CONFIRMED!
- Posts: 300
- Joined: Sun May 26, 2013 2:45 pm
Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!
OK this is the 3rd and final variation of the Cell Phone case VR. All the files should include 3 sets of eye cups like the Rift.
Cel Phone size: 5.7 Inch
Download Link: http://www.thingiverse.com/thing:287183
Cheers
Cel Phone size: 5.7 Inch
Download Link: http://www.thingiverse.com/thing:287183
Cheers
You do not have the required permissions to view the files attached to this post.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
-
- Petrif-Eyed
- Posts: 2708
- Joined: Sat Sep 01, 2012 10:47 pm
Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!
This is a truly outstanding contribution to the community. Thank you kindly and sincerely for sharing such a valuable resource with us.
I hope this grows into a wonderful asset now that more of us can participate, standing on the shoulders of giants such as yourself.
I salute you, sir!
I hope this grows into a wonderful asset now that more of us can participate, standing on the shoulders of giants such as yourself.
I salute you, sir!
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.
- Hannibalj2
- Binocular Vision CONFIRMED!
- Posts: 300
- Joined: Sun May 26, 2013 2:45 pm
Re: Portal Dual 180 WFOV Printing Case + Mobile Case!!
Hello Geekmaster, thanks for the kind words. I hope this tokens can help anyone with their personal projects in which can benefit the community.geekmaster wrote:This is a truly outstanding contribution to the community. Thank you kindly and sincerely for sharing such a valuable resource with us.
I hope this grows into a wonderful asset now that more of us can participate, standing on the shoulders of giants such as yourself.
I salute you, sir!
Thanks for all your advice!
Cheers
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/