Continuous 360 cord turning

This is for discussion and development of non-commercial open source VR/AR projects (e.g. Kickstarter applicable, etc). Contact MTBS admins at customerservice@mtbs3d.com if you are unsure if your efforts qualify.
Post Reply
Direlight
Binocular Vision CONFIRMED!
Posts: 337
Joined: Mon Jan 21, 2013 12:30 pm

Continuous 360 cord turning

Post by Direlight »

Was starting to hijack another thread, so I made a new one.

Took some research, but I actually found one for power cords. They make them for other cord types according to the PDF.


[youtube]http://www.youtube.com/watch?v=f6vej5N2uD4[/youtube]


pdf
User avatar
android78
Certif-Eyable!
Posts: 990
Joined: Sat Dec 22, 2007 3:38 am

Re: Continuous 360 cord turning

Post by android78 »

I think I see a problem or two with this:
1. It looks like there may be 2 or 3 contacts through this which wouldn't be anywhere near enough for digital video and control signals.
2. Looks far too heavy for what you're trying to achieve. You want the swivel to be as light as possible to prevent the feeling that you're trying to turn something with your head.
User avatar
cybereality
3D Angel Eyes (Moderator)
Posts: 11406
Joined: Sat Apr 12, 2008 8:18 pm

Re: Continuous 360 cord turning

Post by cybereality »

There was another thread about this very thing, except using something called "slip rings":

http://www.mtbs3d.com/phpBB/viewtopic.p ... 33&p=89279

Image

Might be a good place to start looking.
Direlight
Binocular Vision CONFIRMED!
Posts: 337
Joined: Mon Jan 21, 2013 12:30 pm

Re: Continuous 360 cord turning

Post by Direlight »

Thanks cyber, heard about slip rings, but didn't know about the thread. Looked at the page looks good, but maybe the other system is useful too if we need retractable. Might combine the rings with a retractable system. At least we got options.

Oh yeah, they said they make custom swivels too. I'm sure they could make a smaller commercial version.
geekmaster
Petrif-Eyed
Posts: 2708
Joined: Sat Sep 01, 2012 10:47 pm

Re: Continuous 360 cord turning

Post by geekmaster »

Those slip ring connectors were available with up to 10 wires, but looked expensive. It would be interesting to see what kind of signal cross-talk or signal impedance mismatches they might have (if that is even important on HDMI-speed digital signals). Depending on their construction, they may have signal integrity or lifespan issues.

As a though experiment, you can picture a slip ring connector as a variation on a headphone jack, which can be rotated in its connector without losing signal. However, you may hear scratchy noises due to friction and signal degradation. Real slip rings require special interface metals such as Tungsten/Gallium, or lubricated fiber contacts. Insufficient lubrication (such as in a rotating headphone jack) would cause poor signal integrity and premature wear.

Here is a slip ring connecter designed for ROV (underwater robot) use, which combiner fiber-optic, power, and signal lines:
http://www.electro-miniatures.com/Fiber_Optic.html
Image

And how they work:
http://www.electro-miniatures.com/HowSl ... orks.shtml
Image

Here is a 6-wire slip ring posted by adafruit for DIY use ($17.50):
http://www.adafruit.com/products/736
[youtube]http://www.youtube.com/watch?v=cngf_eyV_l8[/youtube]

And another they have, with 12-wires ($24.95):
http://www.adafruit.com/products/1195
Image

The adafruit slip rings appear identical to cybereality's posted photo.

The wires can each carry 2A at up to 240V. Not sure about HDMI or USB signal integrity though (possible signal crosstalk at the slip rings).
Direlight
Binocular Vision CONFIRMED!
Posts: 337
Joined: Mon Jan 21, 2013 12:30 pm

Re: Continuous 360 cord turning

Post by Direlight »

Never mind, Rift only has a single cable to the HMD. Ethernet might be useful for going to the control box.
Last edited by Direlight on Sat Feb 23, 2013 2:51 am, edited 2 times in total.
geekmaster
Petrif-Eyed
Posts: 2708
Joined: Sat Sep 01, 2012 10:47 pm

Re: Continuous 360 cord turning

Post by geekmaster »

Direlight wrote:Isn't it possible to have the Rift do everything (even power) via Ethernet?

http://www.trustedreviews.com/news/HDMI ... o-Standard
That comparison table was truncated, losing most of the HDBase-T info. Here is that table (intact):
Image

Interesting. Thanks for this welcome news!
WiredEarp
Golden Eyed Wiseman! (or woman!)
Posts: 1498
Joined: Fri Jul 08, 2011 11:47 pm

Re: Continuous 360 cord turning

Post by WiredEarp »

However, you may hear scratchy noises due to friction and signal degradation. Real slip rings require special interface metals such as Tungsten/Gallium, or lubricated fiber contacts. Insufficient lubrication (such as in a rotating headphone jack) would cause poor signal integrity and premature wear.
Well said. For any sort of long term usage (arcade setting), you really wouldn't want to cheap out on the contacts. I'd imagine there would be a bit of a tradeoff between connection integrity and resistance to turning. This could possibly be overcome with an active solution (motor drive that attempts to keep the twist out of the cable).
User avatar
cadcoke5
Binocular Vision CONFIRMED!
Posts: 210
Joined: Mon May 24, 2010 8:43 pm
Location: near Lancaster, PA USA

Re: Continuous 360 cord turning

Post by cadcoke5 »

For those of you young enough to have not known about land lines without wireless handsets, there were phone-cord de-tangler connectors available They are cheap to play with. I don't recall if they have 2 or 4 wires.

However, I would think that any sort of rotary data connector is going to be a problem at today's high data rates. I wonder if an optical rotary is a better choice for the data line?

But, perhaps I am getting ahead of my self. What is the application? How many potential spins of the cable?

If you just need a data and power cord real and the end device is not rotating much, then you don't actually need to have a swivel connection. There are plenty of examples in the dollar store, where the earphone cord wraps around a device that is always in the middle of the length of the cord.

An old-fashioned telephone handset cord can swivel without a swivel connector... at least it can for a good number of turns. If you aren't connecting to a ballet dancer wearing a head set, then such a connection may be all that you need. They typically have 4 connectors.

Can you tell that I am unemployed? I tend to stay up at night hunting for something to design!

Joe Dunfee
Direlight
Binocular Vision CONFIRMED!
Posts: 337
Joined: Mon Jan 21, 2013 12:30 pm

Re: Continuous 360 cord turning

Post by Direlight »

sen15
One Eyed Hopeful
Posts: 1
Joined: Tue Jun 23, 2015 8:35 pm

Re: Continuous 360 cord turning

Post by sen15 »

This one would suitable for you, details as follows:
http://www.arslipring.com
Post Reply

Return to “VR/AR Research & Development”