Please do! Good luck!

hehe sure its going to be a gift from my uncle lol

U WONT BELIEVE IT WORKS ON MY SAMSUNG 22"

BUT THE ONLY PROBLEM IS THE fps SU**S

MY CARD NOT POWERFUL ENOUGH

JUST INSTALLED ED DRIVER AND ACTIVATOR WITH iz3d INTERLEAVED HORIZONTAL. NOW I HAVE TO BUY THIS HMMM

IS THERE A PLAYER WHICH CAN USE THE SAME MODE ?? INTER HORIZ ??

Voting still doesn't work for some reason. A bug we are working to fix.

Regards,
Neil

The Stereoscopic Player does support interlaced.

it has got lot of options like circular left right etc.. which one ??

but there is a problem. the bottom part of the screen is good. but i get ghosting on the upper part of the screen hmmm any IDEAS ??

Well seeing as the Nvidia 3D Vision certified LCD monitors also have ghosting on the top of the screen I'd say it was a limitation of the technology. You are lucky it even works at all.

Ah i found the problem. the activator is the problem. if i don't select LCD mode 1, the whole screen is ghosted. but if i select LCD mode 1. onlt top half is ghosted and the bottom half looks 3d and it looks soooo good. hope they will fix it soon

its a problem with the activator. they should fix it soon. i am getting the best effect with 1680x1050 75hz and as they say.. 60 gives heavy flicker and in 75hz no headache too

i have sent a mail to their support. lets see if they have a beta ED ATC LOL

so it does work on mine and not on my friends comp even at 75hz and all the difference i can find is mine is 5ms and his monitor is some 9ms so that's the secret behind some LCD working with the glasses

Hi s,

I know what you mean but I would call that "not working right" if half your screen has ghosting. I know it's a gradual ghosting that gets worse with vertical position. Don't get your hopes up that they might fix this. You can bet they won't. I don't know how many years old that driver is. Here's my experience from another thread:

"
Well, I was curious about the LCD modes on the ED-Activator which seemed to do nothing with the dongles I had so I got a new one and this one was straight from E-Dimensional with their logo on it. My other dongles were older and had different logos... H3D and 3D-world (X3D). I figured if the LCD modes do something, they should work with the actual E-Dim dongle and I was right. Somewhere, I read about how to use those LCD modes and so I tried them with the new dongle on my CRT first and got a weird view. The top 3/4 screen was wrong-eyed and only the bottom was correct. I looked at the signals with my oscilloscope and found what was happening. The shutters were being delayed from normal by 3/4 of a screen refresh. That's why there was a transition (eye-view-swapping) 3/4 of the way down the screen. So what must have happened somewhere is that someone thought that a delay like that would help on an LCD display but it didn't on the one I tested with. It just sort of shifted the bad 3d down a bit. It's not even worth describing. Anyway, if you want to try it, do it like this. For Pageflipping mode, start it like normal with the Activator, then once it's on, right click the tray icon again and select "LCD mode 2". Then start some test like iZ3D's shutterglass test or nvidia's floating logo test in DDC stereo 3d mode and you will see what I mean. Try it on a CRT if you can. Shut it off in the reverse order. LCD mode off first, then stereo mode off. If you don't do it this way, it will still probably be OK but there's a chance the dongle may get stuck on and you'll have to power-down your computer to reset the dongle. "LCD mode 1" is just like mode 2 except that it's interlaced. You use it the same way so first turn on interlaced mode, then LCD mode 1. Later, turn off LCD mode 1, then turn off interlaced mode. Obviously you need a horizontally interlaced 3d image on the screen in order to see the effect. Basically, this was a waste of time except for satisfying my curiosity.
"

It's from this thread:
viewtopic.php?f=6&t=4173&hilit=various+activators

Basically, if your just starting out, a CRT is a great place to start. Especially if you want to do things cheaply and CRT's are available. Later on, if you have a good wall to project on, you can get a DLP projector and have an 8-foot-wide 3d display but you have to get one that works with shutterglasses of course and sometimes it's hard to know. You can get a $300 one if you can tolerate 60Hz refresh rates. Play in the dark and it makes a big difference. Sometimes I can't even tell if the glasses are shuttering or not when I'm using my projector like that. Also keep in mind that screen-flicker is less visible with a DLP, than with a CRT.

unfortunate for ED. i am a though customer lol

I file case against company's if they cheat. i sued gigabyte for motherboard and palit for graphics card. now i am going to do the same with ED lol. bad that they have to go through this lol

its bad that they cant fix it. they are using empty signals to fix LCD issue. but they are not doing a good job. but the bottom half looks soo cool. if it works full screen. it would be the best thing i ever had hmmm

Please do, they are a bunch of crooks.

don't worry.. i surely will. and will get my 100$ back too

will let you know soon

No it's not. Their behavior is fraudulent and hurts the industry. I'm sorry that you had to go through this though.
So very true. Once going 3d there's no way back. E-d are not the only ones who helps in making 3d way more complicated than it have to be. I think 3d as phenomena is going to survive anyway. It will only take longer time though.

I just fund a problem with my monitor. at 60hz its not working but at 75hz is half screen. but when i put it in 75hz the vertical will still be 60hz since the monitor wont support anything more than that. when i saw the details, my monitor does 80hz vertical but only 60 horizontal.

And i was looking at BenQ E2400HD which should work and the samsung is compressing the horizontal lines where the BenQ is not.




Screen Size 24" Wide
Color Glossy Black
Resolution 1920x1080
Pixel Pitch 0.276
Brightness 300 cd/㎡
Contrast Ratio 1000:1 (DCR:10000:1 )
Response Time 5ms / 2ms(GTG)
DCR 16.7 million
Viewing Angle 170/160 (L/R;U/D) (CR>=10)
Horizontal Frequency (KHz) 30 ~ 83 (KHz)
Vertical Frequency (Hz) 50 ~ 76 (Hz)
Video Bandwidth (MHZ) 25 ~ 205 (MHz)

I have a feel that this would work what do you feel ?? since it also works with (PC 3D Viewer Kit with LCD Monitor)

get a H5360 or a HD66 man. How much that ed dongle costs second hand? Isnt it the same as the x3d ?

hmmm sorry i bought it and no luck. the samsung was better hmmm wasted 331$ in India its Rs.14,900 i curse ED.. they will pay for it