1.11 rc2 not working at all, 1.10 works fine

Post Reply
User avatar
ysith
One Eyed Hopeful
Posts: 1
Joined: Wed Oct 06, 2010 1:12 am

1.11 rc2 not working at all, 1.10 works fine

Post by ysith »

I posted this same message on the iz3d forums, I'm posting it here aswell to get more people to help me with this problem.

I have tried using the 1.11rc2 driver in loads of different methods on numerous games, I tried interleaved, simple shutter, blc shutter, even anaglyph, but none of them work with any games, yet they all work with both the dymanic and static tests built into the software. Sometimes when I load a game it says "can't load output dll", and sometimes it says nothing. Everything works fine with the 1.10 driver.

I am using some edimensional glasses with the ed activator and dongle plugged into my Sony GDM-FW900 CRT Monitor, with an ATI 4870 1gb graphics card.

note: I still have 29 days left on my trial period.
User avatar
cirk2
Certif-Eyed!
Posts: 521
Joined: Fri May 11, 2007 10:13 am

Re: 1.11 rc2 not working at all, 1.10 works fine

Post by cirk2 »

make shure that the gamen you're using is DX9 and 32bit (or you enabel the DX10 driver in the settings page).

You may want to try island hopping:
http://www.praetorianstudios.net/" onclick="window.open(this.href);return false;

it is very simple and good to test out different settings quickly. (I used it to set up drivers for my 3D TV)
Image
Post Reply

Return to “iZ3D Legacy Drivers”