Gamelist: not-working with iZ3D v1.10
Posted: Tue Feb 16, 2010 2:40 pm
Hi all,
OK, I think I've jumped the gun a little bit. This used to be the "anaglyph-only" thread but I had a better idea. Just make a "not-working gamelist" and the anaglyph-only list will be a subset of that so I'm changing this thread to be a not-working gamelist since it's still relatively new and noone else has posted anything yet. The original post says this:
"I've found that some games work with the iZ3D driver (version 1.10) in anaglyph mode but not in any other mode that I can test. This is the anaglyph-only gamelist. Please contribute."
and this
"I've informed iZ3D and there's a parallel thread on their forum but I thought it belongs in both places. In other modes, you get a "can't load output dll" error. If you find a game like that, please try it in anaglyph mode and report it here if it works in anaglyph only. Thanks."
Now I just want to make a not-working gamelist labeled according to characteristics of how they work/don't work:
Catwoman - *1, *2, *7
The Incredible Hulk - *1, *2, *7
Lord of the Rings, Return of the King, *1, *2, *7, *8
Spiderman Web of Shadows - *1, *2, *7
Spiderman Friend or Foe - *1, *2
Ultimate Spiderman - *1, *2, *7
X-men Legends 2 - *1, *2
Marvel Ultimate Alliance - *1, *2, *7
Prince of Persia, Warrior Within - *1, *2, *7
Mageknight Apocalypse - *1, *2, *7, (*3a only with v1.10), *8
Starwars, the Force Unleashed, Ultimate Sith edition (disc version) - *3a
Starwars, the Force Unleashed (Steam version) - probably works w/iZ3D, *6
Starwars, Republic Commando - *3a, *8
*1) "cant load output dll" error (check "show on-screen messages" checkbox to see this)
*2 ) only anaglyph, iZ3D monitor (and ATI 3D DLP?) outputs work.
*3) driver causes game crash, details should be added if needed.
*3a) game crashes on start
*4) game runs with driver loaded/injected but no s3d, toggle does nothing.
*5) any other category suggestions anyone? Punkbusted games?
*6 ) I've been unable to confirm this
*7 ) confirmed no-CD crack fixes "can't load" problem so that all modes work
*8 ) game is reported as DX8 with nvidia's old-school 3d settings logfile
Regarding *1 and *2,
I believe the cause is a conflict between the licensing system and the SafeDisc protection system on some game-discs. A similar reason is why I think the Steam version of TFU works and the disc version doesn't. The games I've tested were done with anaglyph and at least two other modes but I expect the same results with all other licensed modes...
licensed modes: "can't load",
non-licensed modes (anaglyph, iZ3D monitor, and ATI 3D DLP too?): OK
Games should use DX9 unless otherwise noted. Please contribute.
--- iondrive ---
PS: the SHORT LIST (after removing SafeDisc issue and DX8 games):
Starwars, the Force Unleashed, Ultimate Sith edition (disc version) - *3a
Yeah, that's pretty short.
OK, I think I've jumped the gun a little bit. This used to be the "anaglyph-only" thread but I had a better idea. Just make a "not-working gamelist" and the anaglyph-only list will be a subset of that so I'm changing this thread to be a not-working gamelist since it's still relatively new and noone else has posted anything yet. The original post says this:
"I've found that some games work with the iZ3D driver (version 1.10) in anaglyph mode but not in any other mode that I can test. This is the anaglyph-only gamelist. Please contribute."
and this
"I've informed iZ3D and there's a parallel thread on their forum but I thought it belongs in both places. In other modes, you get a "can't load output dll" error. If you find a game like that, please try it in anaglyph mode and report it here if it works in anaglyph only. Thanks."
Now I just want to make a not-working gamelist labeled according to characteristics of how they work/don't work:
Catwoman - *1, *2, *7
The Incredible Hulk - *1, *2, *7
Lord of the Rings, Return of the King, *1, *2, *7, *8
Spiderman Web of Shadows - *1, *2, *7
Spiderman Friend or Foe - *1, *2
Ultimate Spiderman - *1, *2, *7
X-men Legends 2 - *1, *2
Marvel Ultimate Alliance - *1, *2, *7
Prince of Persia, Warrior Within - *1, *2, *7
Mageknight Apocalypse - *1, *2, *7, (*3a only with v1.10), *8
Starwars, the Force Unleashed, Ultimate Sith edition (disc version) - *3a
Starwars, the Force Unleashed (Steam version) - probably works w/iZ3D, *6
Starwars, Republic Commando - *3a, *8
*1) "cant load output dll" error (check "show on-screen messages" checkbox to see this)
*2 ) only anaglyph, iZ3D monitor (and ATI 3D DLP?) outputs work.
*3) driver causes game crash, details should be added if needed.
*3a) game crashes on start
*4) game runs with driver loaded/injected but no s3d, toggle does nothing.
*5) any other category suggestions anyone? Punkbusted games?
*6 ) I've been unable to confirm this
*7 ) confirmed no-CD crack fixes "can't load" problem so that all modes work
*8 ) game is reported as DX8 with nvidia's old-school 3d settings logfile
Regarding *1 and *2,
I believe the cause is a conflict between the licensing system and the SafeDisc protection system on some game-discs. A similar reason is why I think the Steam version of TFU works and the disc version doesn't. The games I've tested were done with anaglyph and at least two other modes but I expect the same results with all other licensed modes...
licensed modes: "can't load",
non-licensed modes (anaglyph, iZ3D monitor, and ATI 3D DLP too?): OK
Games should use DX9 unless otherwise noted. Please contribute.
--- iondrive ---
PS: the SHORT LIST (after removing SafeDisc issue and DX8 games):
Starwars, the Force Unleashed, Ultimate Sith edition (disc version) - *3a
Yeah, that's pretty short.