1.10RC2a Drivers Released!
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
1.10RC2a Drivers Released!
Hello everyone!
Great news to share today! 1.10RC2 drivers are out. Here are the key improvements:
- New profiles for Call Of Cthulhu DCoTE, Call of Juarez - Bound in Blood, Drakensang, Rise of the Argonauts, Trine, Tomb Rider Legend, Sims 3, Street Fighter IV, Flatout Ultimate Carnage, G-Force, Empire Total War, Battlestation Pacific, Overlord 2, HAWX.
- Added Stereo Screenshot and Swap L&R keys to Control Center.
- Third-part d3d9.dll support added.
- Added additional Side By Side modes for more recording flexibility.
- Added gap control between views in Side By Side mode to Config.xml.
- Added customizable matrices mode to Anaglyph mode.
- Anaglyph output now use normal colors in mono mode.
- Fixed Witcher, Fallout 3 profiles.
- Improved support for fullscreen YouTube videos (only on Vista with Aero activated).
- Improved table method (updated algorithm for new glasses!)
- DX9/DX10 outputs merged. (NOTE: DX10 support is not available YET)
- Improved computability with Steam Community on x64 platforms.
- Enhanced Mouse Lock.
- Improved performance with some D3D8 games.
- Screenshot button handling improved.
- Improved key recognizing in Control Center.
- Fixed problems with Runes of Magic, ARMA 2, Rise of Flight, Ghost Busters, Resident Evil 4, Duke Nukem Manhattan Project, Mini Ninjas, Trine, Terminator Salvation (mono objects).
- Fixed shaders analyzing in Resident Evil 5.
- Fixed second window position with StereoMirror output.
Share your thoughts and findings!
Download HERE!
BlackQ will add additional details and explain the significance of all this shortly.
EDIT: This driver has been hotfixed to support Resident Evil 5!
Regards,
Neil
Great news to share today! 1.10RC2 drivers are out. Here are the key improvements:
- New profiles for Call Of Cthulhu DCoTE, Call of Juarez - Bound in Blood, Drakensang, Rise of the Argonauts, Trine, Tomb Rider Legend, Sims 3, Street Fighter IV, Flatout Ultimate Carnage, G-Force, Empire Total War, Battlestation Pacific, Overlord 2, HAWX.
- Added Stereo Screenshot and Swap L&R keys to Control Center.
- Third-part d3d9.dll support added.
- Added additional Side By Side modes for more recording flexibility.
- Added gap control between views in Side By Side mode to Config.xml.
- Added customizable matrices mode to Anaglyph mode.
- Anaglyph output now use normal colors in mono mode.
- Fixed Witcher, Fallout 3 profiles.
- Improved support for fullscreen YouTube videos (only on Vista with Aero activated).
- Improved table method (updated algorithm for new glasses!)
- DX9/DX10 outputs merged. (NOTE: DX10 support is not available YET)
- Improved computability with Steam Community on x64 platforms.
- Enhanced Mouse Lock.
- Improved performance with some D3D8 games.
- Screenshot button handling improved.
- Improved key recognizing in Control Center.
- Fixed problems with Runes of Magic, ARMA 2, Rise of Flight, Ghost Busters, Resident Evil 4, Duke Nukem Manhattan Project, Mini Ninjas, Trine, Terminator Salvation (mono objects).
- Fixed shaders analyzing in Resident Evil 5.
- Fixed second window position with StereoMirror output.
Share your thoughts and findings!
Download HERE!
BlackQ will add additional details and explain the significance of all this shortly.
EDIT: This driver has been hotfixed to support Resident Evil 5!
Regards,
Neil
-
- Sharp Eyed Eagle!
- Posts: 390
- Joined: Sun Jun 17, 2007 4:21 pm
Re: 1.10RC2 Drivers Released!
of course I"ll here we are:
Really we add three languages, but I put third one - French - tomorrow - sorry for delay. To use them - install driver and put corresponding language xml file to:
XP: “\Documents and Settings\All Users\Application Data\iZ3D Driver\Language”
Vista: “\ProgramData\iZ3D Driver\Language”
We change injection mechanism a bit - so, third party dll within game directory will work now. Try also to record video with new modes of Side-by-Side output - we hope it will work now too.
For people who are experimenting with anaglyph glasses we added anaglyph color control to Config.xml (because it is advance feature we did not put it to description). Here the matrix for custom anaglyph mode:
<AnaglyphOutput>
<CustomLeftMatrix
m00="1" m01="0" m02="0"
m10="0" m11="1" m12="0"
m20="0" m21="0" m22="1"/>
<CustomRightMatrix
m00="1" m01="0" m02="0"
m10="0" m11="1" m12="0"
m20="0" m21="0" m22="1"/>
</AnaglyphOutput>
final color would be: CustomLeftMatrix*CL + CustomRightMatrix*CR
and finally for Resident Evil 5 fun - full optimization will be checked tomorrow 10AM San Diego time and new profile for RE5 will be released same day
Really we add three languages, but I put third one - French - tomorrow - sorry for delay. To use them - install driver and put corresponding language xml file to:
XP: “\Documents and Settings\All Users\Application Data\iZ3D Driver\Language”
Vista: “\ProgramData\iZ3D Driver\Language”
We change injection mechanism a bit - so, third party dll within game directory will work now. Try also to record video with new modes of Side-by-Side output - we hope it will work now too.
For people who are experimenting with anaglyph glasses we added anaglyph color control to Config.xml (because it is advance feature we did not put it to description). Here the matrix for custom anaglyph mode:
<AnaglyphOutput>
<CustomLeftMatrix
m00="1" m01="0" m02="0"
m10="0" m11="1" m12="0"
m20="0" m21="0" m22="1"/>
<CustomRightMatrix
m00="1" m01="0" m02="0"
m10="0" m11="1" m12="0"
m20="0" m21="0" m22="1"/>
</AnaglyphOutput>
final color would be: CustomLeftMatrix*CL + CustomRightMatrix*CR
and finally for Resident Evil 5 fun - full optimization will be checked tomorrow 10AM San Diego time and new profile for RE5 will be released same day
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: 1.10RC2 Drivers Released!
No progress on shutters
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
- cirk2
- Certif-Eyed!
- Posts: 521
- Joined: Fri May 11, 2007 10:13 am
Re: 1.10RC2 Drivers Released!
I've updated my driver, but it doesen't recognize my Interlanced licence. I even can't update my License in the ACEN (To many parameters have changed)...
Edit: downgraded to 1.09, activated licence, removed licence, installed 1.10rc2, now it works
Edit: downgraded to 1.09, activated licence, removed licence, installed 1.10rc2, now it works
- BlackShark
- Certif-Eyable!
- Posts: 1156
- Joined: Sat Dec 22, 2007 3:38 am
- Location: Montpellier, France
Re: 1.10RC2 Drivers Released!
For me the License was only detected when i launched the 3rd game.
The 2 first applications i launched showed the trial period.
The 2 first applications i launched showed the trial period.
Passive 3D forever !
DIY polarised dual-projector setup :
2x Epson EH-TW3500 (2D 1080p)
Xtrem Screen Daylight 2.0, for polarized 3D
3D Vision gaming with signal converter : VNS Geobox 501
DIY polarised dual-projector setup :
2x Epson EH-TW3500 (2D 1080p)
Xtrem Screen Daylight 2.0, for polarized 3D
3D Vision gaming with signal converter : VNS Geobox 501
-
- Binocular Vision CONFIRMED!
- Posts: 320
- Joined: Tue May 15, 2007 8:11 am
Re: 1.10RC2 Drivers Released!
Now we eagerly await yuri's report with the new glasses.Neil wrote: - Improved table method (updated algorithm for new glasses!)
- Neil
- 3D Angel Eyes (Moderator)
- Posts: 6882
- Joined: Wed Dec 31, 1969 6:00 pm
- Contact:
Re: 1.10RC2 Drivers Released!
Actually, I may have made a journalistic error here.
I was so rushed to get the story out while packing for my trip to the 3D Entertainment Summit, I may have misunderstood the intention of this statement. I mentioned the glasses relevance, not iZ3D.
It COULD have relevance for the glasses, but I can't confirm yet. I'll leave it to iZ3D to explain this remark.
Regards,
Neil
I was so rushed to get the story out while packing for my trip to the 3D Entertainment Summit, I may have misunderstood the intention of this statement. I mentioned the glasses relevance, not iZ3D.
It COULD have relevance for the glasses, but I can't confirm yet. I'll leave it to iZ3D to explain this remark.
Regards,
Neil
- KindDragon
- Cross Eyed!
- Posts: 108
- Joined: Sat Mar 10, 2007 4:05 am
- Location: Russia
Re: 1.10RC2 Drivers Released!
This method is not for new glasses, but for old. It is now default and should be slightly lower ghosting even with old glasses. The old mode is available under name "CFL".Neil wrote: - Improved table method
Stereoscopic Steam Group: Join now
-
- Sharp Eyed Eagle!
- Posts: 363
- Joined: Thu Mar 26, 2009 6:51 am
Re: 1.10RC2 Drivers Released!
Shame, I'm the reason for these two things and no longer have my S3D setup. FYI, Duke Nukem Manhattan Project should look really good in Stereo 3D, if anyone wants to go buy it (Cheap)Neil wrote: - Added Stereo Screenshot and Swap L&R keys to Control Center.
- Fixed problems with Runes of Magic, ARMA 2, Rise of Flight, Ghost Busters, Resident Evil 4, Duke Nukem Manhattan Project, Mini Ninjas, Trine, Terminator Salvation (mono objects).
Make up your own opinions, don't believe B.S! Especally when its about a human and spread with the intent of ruing that persons life.
3D is the Future of Viewing Tech, you see in 3D naturally so how can it not be something you want on your screens?!
3D is the Future of Viewing Tech, you see in 3D naturally so how can it not be something you want on your screens?!
- cybereality
- 3D Angel Eyes (Moderator)
- Posts: 11407
- Joined: Sat Apr 12, 2008 8:18 pm
Re: 1.10RC2 Drivers Released!
Yes, I remember playing Duke Nukem Manhattan Project with the old Nvidia drivers and it looked really nice.UndeadD3vi1 wrote:FYI, Duke Nukem Manhattan Project should look really good in Stereo 3D, if anyone wants to go buy it (Cheap)
-
- Certif-Eyed!
- Posts: 504
- Joined: Mon Apr 16, 2007 11:36 pm
- Location: San Diego, California
- Contact:
Re: 1.10RC2 Drivers Released!
Hey Guys! RC2a is out. This should fix Resident Evil 5!
Go get it here: http://www.iz3d.com/drivers/download.ph ... p_1_10rc2a" onclick="window.open(this.href);return false;
(Neil if you could update your link, it would be great )
Go get it here: http://www.iz3d.com/drivers/download.ph ... p_1_10rc2a" onclick="window.open(this.href);return false;
(Neil if you could update your link, it would be great )
- cybereality
- 3D Angel Eyes (Moderator)
- Posts: 11407
- Joined: Sat Apr 12, 2008 8:18 pm
Re: 1.10RC2 Drivers Released!
Not really a complaint, just a comment: DirectX11 class hardware comes out next week and DX11 games will shortly follow (GRID2, etc.).