I'm very close to finishing my DIY VR Headset!
Posted: Sat Mar 22, 2014 1:32 pm
Hi everybody, I am the developer of GearTornado (http://geartornado.com)
I have been working on my DIY VR Headset for a few weeks.
First I built it with the case of LCD Display. It was terrible.
Now I have a 3D Printed case.
![Image](http://farm4.staticflickr.com/3747/13333831363_c59accbd0f_z.jpg)
http://imgur.com/a/SjaYJ
For more photos : http://www.flickr.com/photos/mclightnin ... 749397504/
Earlier build : http://www.flickr.com/photos/mclightnin ... 602046004/
And in a couple of days, I will have my headtracking sensor delivered and ready to attach.
Cost :
* Display : $ 133 (now discounted $113 )( http://www.ebay.com/itm/5-6inch-TFT-LCD ... 1c3274b928 )
* Lenses : $ 25 http://www.ebay.com/itm/5x-pocket-loupe ... 3a79987a19
* Arduino Mini Pro : $ 5.83 http://dx.com/p/arduino-pro-mini-microc ... mhz-178183
* 9DOF IMU GY-85 : $ 11.81 http://dx.com/p/gy-85-6dof-9dof-imu-sen ... y30TK2SxwU
Based on : http://www.roadtovr.com/build-your-own- ... ift-guide/
I have been working on my DIY VR Headset for a few weeks.
First I built it with the case of LCD Display. It was terrible.
Now I have a 3D Printed case.
![Image](http://farm4.staticflickr.com/3747/13333831363_c59accbd0f_z.jpg)
http://imgur.com/a/SjaYJ
For more photos : http://www.flickr.com/photos/mclightnin ... 749397504/
Earlier build : http://www.flickr.com/photos/mclightnin ... 602046004/
And in a couple of days, I will have my headtracking sensor delivered and ready to attach.
Cost :
* Display : $ 133 (now discounted $113 )( http://www.ebay.com/itm/5-6inch-TFT-LCD ... 1c3274b928 )
* Lenses : $ 25 http://www.ebay.com/itm/5x-pocket-loupe ... 3a79987a19
* Arduino Mini Pro : $ 5.83 http://dx.com/p/arduino-pro-mini-microc ... mhz-178183
* 9DOF IMU GY-85 : $ 11.81 http://dx.com/p/gy-85-6dof-9dof-imu-sen ... y30TK2SxwU
Based on : http://www.roadtovr.com/build-your-own- ... ift-guide/