Meant to be Seen

Hi folks.I'm thinking on buying this 3d tv for use with 3d Vision,but I have a doubt that is really annoying me:
In this tv supported 3d modes there is no inteleced or interleaved mode.With a EDID override this mode can be available?
3d modes of Tv Lg 3d Smart Tv 47lm5800:

Frame Packing (720 60p)
45.00 60.00 Top & Bottom, Side by Side (half)
1080i
1920x1080
33.70 60 Top & Bottom, Side by Side (half)
1080p
53.95 / 54.00 23.98 / 24.00 Frame Packing (1080 24p)
67.50 60.00 Top & Bottom, Side by Side, Single Frame
Sequential
27.00 24.00 Top & Bottom, Side by Side (half)
33.70 30.00 Top & Bottom, Side by Side (half)
RGB 1080p 1920x1080 66.587 59.93 Top & Bottom, Side by Side
USB 1080p 1920x1080 33.75 30.00 Top & Bottom, Side by Side, MPO (Photo)
DLNA 1080p 1920x1080 33.75 30.00 Top & Bottom, Side by Side, MPO (Photo)

Thank you for any help

Hi Ricardo !

I'm using 2 different LGs in 3D Vision mode through the EDIT override:
DM2752D & 42LM620S

Both work just great, but the 42LM had the eyes exchanged by default, so I had to run the setup wizard to switch it back.

Question to others:
It's been quite a while that I played on my big screen, so I had a peek into my actual nV driver (320.49) and couldn't find that eye-swaping option any more (you know, that thing with blue and green squares and triangles) ... has it been left out in recent releases ?

Cheers,
Maggi

Thank you Maggi.The main reason I want to buy a LG 3d passive tv is to play PCSX2 3d(http://forums.pcsx2.net/Thread-Gsdx-3D- ... copy-Patch)using interlaced or interleaved modes.I tried it with my samsung 3d active plasma using side by side mode,but the results were not so good(small blur around characters).Best game to test it is Grandia III cause it has great convergence and depth.Can you tell me what EDID override you are using?.Thank you.



Windows 7 x64-Intel i7 2700k(3.5hz)-Motherboard asus P8z77 m pro-Ram 4gb Kingston-Evga GTX 660ti
Samsung 3dtv PL51D490

Sorry for the late reply. It seems, my notification settings were screwed up.

I used the needed .inf files from here:
http://3dvision-blog.com/7163-make-your ... 3d-vision/

Then I installed the Acer HR274H driver for my LG monitors.