| Author |
Message |
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
I have an issue with activation of 3D synchronization.
3D Sync don't work, however projector's menu show needed (native) resolution on 120Hz frequency.
I have 1.01 version of firmware for BENQ 782 ST.
Other person with BENQ 782 ST, but with 1.0 firmware doesn't have such problems, and stereo 3D works good for him.
I bought this projector for stereo 3D, and it doesn't work on my firmware.
What do I need to do, and how you can help me?
P.S. I also want to use my projector only via DVI connection, VGA gives poor quality signal that I can't accept.
I bought this projector because of DVI support!
|
| Fri Jul 23, 2010 9:00 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
That all are weak in this question. 2 day weighs a question.
|
| Sat Jul 24, 2010 11:36 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
|
| Sat Jul 24, 2010 12:31 pm |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
The PREVENTION people buy BENQMP782ST c insertion V1.00 Then there will be a signal on DVI 1280X800X32X120 c CD V1.11 - V1.33 on video stereoscopic 
|
| Sat Jul 24, 2010 1:22 pm |
|
|
|
Likay
Petrif-Eyed
Joined: Sat Apr 07, 2007 4:34 pm
Posts: 2708
Location: Sweden
|
I'm sorry but i really don't get the question. However, even if the projector is a 120Hz it's far from certain that the projector will work in stereo-3d, especially counting various setups. What is your system and what stereodriver do you use?
_________________Mb: Asus P5W DH Deluxe Cpu: C2D E6600 Gb: Nvidia 7900GT + 8800GTX 3D:100" passive projector polarized setup + 22" IZ3D 
|
| Sun Jul 25, 2010 3:26 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
My system; мини MSI/ATHLON 2-2,7Hg/2G/GF9800/HDD-1T/POVER450W. The driver I use for video from NVIDIA V1.11 and 3D I look at the permission 1280х800х32х120 ^. BENQMP782ST it is connected through adapter DVI-HDMI. It is possible to establish V1.33 + inf ACER H5360, but there is a prevention from NVIDIA it is a problem. 
|
| Sun Jul 25, 2010 10:35 am |
|
|
|
Likay
Petrif-Eyed
Joined: Sat Apr 07, 2007 4:34 pm
Posts: 2708
Location: Sweden
|
yeah, nvidia is a problem everywhere...  _________________Mb: Asus P5W DH Deluxe Cpu: C2D E6600 Gb: Nvidia 7900GT + 8800GTX 3D:100" passive projector polarized setup + 22" IZ3D
|
| Sun Jul 25, 2010 10:40 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
It is possible to alter inf ACER H5360, and at reproduction of prevention NVIDIA небудет нр points should be put on a backspacing
|
| Sun Jul 25, 2010 11:03 am |
|
|
|
Likay
Petrif-Eyed
Joined: Sat Apr 07, 2007 4:34 pm
Posts: 2708
Location: Sweden
|
I'm sorry but i have too much difficulties understanding. I know you can enable 3d for projectors using a modified inf but you may encounter other problems instead. I just wastly read a little about this projector and i can only see it's 3d-ready... Dunno what protocol it reads or uses. I guess you have to experiment. _________________Mb: Asus P5W DH Deluxe Cpu: C2D E6600 Gb: Nvidia 7900GT + 8800GTX 3D:100" passive projector polarized setup + 22" IZ3D
|
| Sun Jul 25, 2010 11:20 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
Yes only to experiment.
|
| Sun Jul 25, 2010 11:27 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
Put CD V1.33 driver + inf ACER H5360. Also it turns out that NVIDIA has made the first steps towards other projectors. BENQ 782 itself it is switched at passage of a stereo of the test truth 800х600х32х120 and a foreshortening правельный.Фирменная prompt too in правельном a foreshortening.Но as soon as I put 1280х800х32х120 that the test passes at 1280х720. HERE SUCH AFFAIRS. The main thing that already supports the test BENQ MP782ST
|
| Wed Aug 04, 2010 10:51 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
|
| Wed Aug 04, 2010 11:41 am |
|
|
|
sibboi
One Eyed Hopeful
Joined: Fri Jul 23, 2010 8:24 am
Posts: 30
|
HELLO! Forgive for bad English. Now my projector BENQ MP782 ST works with the driver v.266.58 3D VISION NVIDIA with the permission 1280х800з32@120 hg with the transmitter emulator 3D VISION NVIDIA with glasses ACER E1b DLP 3D Glasses. ArcSoft TotalMedia® Theatre 5 and In addition to playing Blu-ray ISO to driver 3D VISION . For stable work of glasses DLP- Link
|
| Wed Apr 13, 2011 11:35 am |
|
|
|
