[DIY] Fluid-based prismatic stereoscopic goggles
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
[DIY] Fluid-based prismatic stereoscopic goggles
Hello guys!
I'm reading this forum quite a long time, however not posted here yet, I think it's right time to start
Recently I found for myself very exiting and marvelous way for low-cost home-brew stereoscopy! Hope you will like it too!
It's "Fluid-based prismatic stereoscopic goggles", strangely I didn't found any evidence of this tech earlier in the Internet, and no sign of it on MTBS forum also!
This is actually full-color, no-ghosting stereoscopic goggles that can be easily made at home for a price about $1! Way ahead of anaglyph tech.
Idea is simple - you know about cross-eyed method of viewing stereo-pictures, idea of these goggles is to make optical device to view cross-eyed content
from PC monitor, with which you don't need to strain your eyes. And it's actually work very well!
Originally construction of these goggles was published by Sergey Velichkin in “Science and Life” Russian magazine long time ago,
I've contacted author and he allowed me to translate these instructions in English to show it to you guys!
This technology is free to use, non commercial in any sense and with minimum effort you can approach to visual quality of industrial devices.
These goggles have they're flaws but they are so small against benefits!
Here you can find step-by-step instructions of how to make these goggles, how to use them and also pack of useful links:
http://max.in.ua/fluid_stereo_goggles.pdf
I will drop here a few pictures
Materials needed:
Schematics with sizes:
Ready prism filled with glycerol:
Prism with glass-mounting
Head-mounted prism
Actually using these home-made goggles you can view stereoscopic pictures and movies without special software,
play Quake3 Arena in full stereo without artifacts, play Avatar game without additional drivers,
and with usage of IZ3D or DDD TriDef Ignition drivers play games like DIRT, Fallout3, CoD Modern Warfare 2 etc. In great fully passive stereo!
P.S. Just to mention - I have worked with different stereoscopic displays (Zalman, Philips), and have Vuzix VR920 at home
I'm reading this forum quite a long time, however not posted here yet, I think it's right time to start
Recently I found for myself very exiting and marvelous way for low-cost home-brew stereoscopy! Hope you will like it too!
It's "Fluid-based prismatic stereoscopic goggles", strangely I didn't found any evidence of this tech earlier in the Internet, and no sign of it on MTBS forum also!
This is actually full-color, no-ghosting stereoscopic goggles that can be easily made at home for a price about $1! Way ahead of anaglyph tech.
Idea is simple - you know about cross-eyed method of viewing stereo-pictures, idea of these goggles is to make optical device to view cross-eyed content
from PC monitor, with which you don't need to strain your eyes. And it's actually work very well!
Originally construction of these goggles was published by Sergey Velichkin in “Science and Life” Russian magazine long time ago,
I've contacted author and he allowed me to translate these instructions in English to show it to you guys!
This technology is free to use, non commercial in any sense and with minimum effort you can approach to visual quality of industrial devices.
These goggles have they're flaws but they are so small against benefits!
Here you can find step-by-step instructions of how to make these goggles, how to use them and also pack of useful links:
http://max.in.ua/fluid_stereo_goggles.pdf
I will drop here a few pictures
Materials needed:
Schematics with sizes:
Ready prism filled with glycerol:
Prism with glass-mounting
Head-mounted prism
Actually using these home-made goggles you can view stereoscopic pictures and movies without special software,
play Quake3 Arena in full stereo without artifacts, play Avatar game without additional drivers,
and with usage of IZ3D or DDD TriDef Ignition drivers play games like DIRT, Fallout3, CoD Modern Warfare 2 etc. In great fully passive stereo!
P.S. Just to mention - I have worked with different stereoscopic displays (Zalman, Philips), and have Vuzix VR920 at home
Last edited by Johnny-Mnemonic on Sat Feb 06, 2010 1:42 pm, edited 2 times in total.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- cybereality
- 3D Angel Eyes (Moderator)
- Posts: 11407
- Joined: Sat Apr 12, 2008 8:18 pm
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Hmm, thats interesting. Not the most practical solution, for sure, but still a cool concept. So how does it look, though? I mean, is it much better than just free-viewing cross-eyed?
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Hi Cybereality!cybereality wrote:Hmm, thats interesting. Not the most practical solution, for sure, but still a cool concept. So how does it look, though? I mean, is it much better than just free-viewing cross-eyed?
Sure it's much better - first you does not strain your eyes, at all, so you can play hours in such setup and feel Ok.
Second - these lens capable to converge two big pictures - so full-screen stereo-pairs works like charm (it's very hard and painful to cross-eye such big picture by yourself). Actually with this prism you can converge two 22" monitors (I didn't tried this yet, my friend maximum played with such prism on 30" screen) while viewing distance to them will be like normal 50-60cm
I can tell you that while I have VR920, after I made pair of these fluid-goggles I preferably use them,
I'm continue to using VR920 only when I need actual head-mounted display or head-tracking.
It's also in some sense better than many stereo-monitors, in terms of ghosting (you have perfect picture-separation), or flickering (when we talk about active-shutters), and c'mon it's only 1$ self-made stuff
P.S.
You can also use it with any display, and capabilities like resolution, colors, etc. will depend from your screen.
I'm using these goggles with my 22" screen, and with my 9" eeePC, working ok on usual distances from screen.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
-
- Certif-Eyed!
- Posts: 642
- Joined: Sat Sep 22, 2007 3:11 am
- Location: Valencia (Spain)
Re: [DIY] Fluid-based prismatic stereoscopic goggles
I only can say.... excellent!!
I like the concept a lot. I'm going to try it out as soon as possible. Thanks for posting.
I like the concept a lot. I'm going to try it out as soon as possible. Thanks for posting.
Zalman Trimon ZM-M220W / Acer H5360 with Another Eye2000 shutters / nVIDIA GTX760
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
You welcome!crim3 wrote:I'm going to try it out as soon as possible. Thanks for posting.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Likay
- Petrif-Eyed
- Posts: 2913
- Joined: Sat Apr 07, 2007 4:34 pm
- Location: Sweden
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Cool find!
Just adding: The iz3d driver can be used for side-by-side or with dual screens and the dual vga-option.
Just adding: The iz3d driver can be used for side-by-side or with dual screens and the dual vga-option.
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
I will try to test it with two monitors.Likay wrote:Cool find!
Just adding: The iz3d driver can be used for side-by-side or with dual screens and the dual vga-option.
Will be interesting to see prisms from other peoples
Actually fluid-based prism is easier you can make at home, and it demonstrates principle quite well!
But it also can be done from solid organic-glass, you can make it thinner, and lighter and smaller.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Is there any keystone or color spectrum separation with these?
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
With prism that I built there is some very small chromatic effect noticeable around bright white objects.Okta wrote:Is there any keystone or color spectrum separation with these?
[Edited] There's also some keystone effect, but if your prism itself is parallel to the monitor surface this effect is barely noticeable.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
What have you found as the best method to cut the plastic? Just run a sharp knife over it until its through? Cd plastic is pretty brittel and prone to crack.
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
General Idea is to run a few times with knife along metal-line, to cut about half of plastic thickness, and then to broke it along this line.Okta wrote:What have you found as the best method to cut the plastic? Just run a sharp knife over it until its through? Cd plastic is pretty brittel and prone to crack.
But you need to be very gentle while breaking it, also you can cut-off thick parts of CD box first with cutting pliers, and then start to run lines with knife.
Also, break plastic with hands by making slow pushes.
All this worked for me fine, but first transparent part I broke while trained
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
-
- Two Eyed Hopeful
- Posts: 52
- Joined: Fri Apr 11, 2008 12:19 pm
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Amazing!! Really smart and usable idea 8)
- wuhlei
- Binocular Vision CONFIRMED!
- Posts: 287
- Joined: Tue Dec 18, 2007 4:23 am
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
This is the best diy I seen so far! thank you
What about fiber optics is it too expensive?
What about fiber optics is it too expensive?
Albert Einstein
"The true sign of intelligence is not knowledge but imagination."
"The true sign of intelligence is not knowledge but imagination."
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Borg_Rootan, wuhley, thanks guys!
I dont know about fiber optics, but I want to make such prism from organic glass somewhere at spring-summer.
Played Assasins-Creed with IZ3D side-by-side driver, and this prism, pretty amazing
I dont know about fiber optics, but I want to make such prism from organic glass somewhere at spring-summer.
Played Assasins-Creed with IZ3D side-by-side driver, and this prism, pretty amazing
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
It would be nice if the iz3d side by side driver had borders so the aspect ratio wasnt mangled.Johnny-Mnemonic wrote:Borg_Rootan, wuhley, thanks guys!
I dont know about fiber optics, but I want to make such prism from organic glass somewhere at spring-summer.
Played Assasins-Creed with IZ3D side-by-side driver, and this prism, pretty amazing
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
It is already have!Okta wrote:It would be nice if the iz3d side by side driver had borders so the aspect ratio wasnt mangled.
I've also tried DDD Ignition driver but it's without borders.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
It does? I tried v1.10 yesterday and it doesnt.Johnny-Mnemonic wrote:It is already have!Okta wrote:It would be nice if the iz3d side by side driver had borders so the aspect ratio wasnt mangled.
I've also tried DDD Ignition driver but it's without borders.
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
-
- Binocular Vision CONFIRMED!
- Posts: 204
- Joined: Sat Sep 19, 2009 12:07 am
- Location: Hungary
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
does this solution work also with big, projected screen?
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Sure, why not. You just need to sit at proper distance, which you need to determine practically.relaxman wrote:does this solution work also with big, projected screen?
Anyway you can make prism with other characteristics by tweaking angles, and in theory you can make prism for any viewing distance.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Just tried with v.1.10 - side by side driver, crosseyed, in "Assassins Creed" black borders appears and picture is in proper aspect ratio.Okta wrote:It does? I tried v1.10 yesterday and it doesnt.
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
-
- Golden Eyed Wiseman! (or woman!)
- Posts: 1644
- Joined: Fri Aug 21, 2009 9:06 pm
Re: [DIY] Fluid-based prismatic stereoscopic goggles
I have done something similar! I have some lenses that are made to do the exact reverse, they let both eyes focus on a point between both of them, but by simply rotating the lenses, they instead create a perception of image off to the side as in front of you, works just like this. Your solution is definitely a lot easier to make, though.
- Rosomack
- Two Eyed Hopeful
- Posts: 95
- Joined: Sun Feb 15, 2009 1:45 pm
- Location: Gdansk, Poland
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Hey, great idea! That might actually be better than some commercial solutions No ghosting, no brightness loss. Great!
Only thing that bugs me - don't you have to keep your head perfectly straight and at a certain distance from the displays for this to work?
Only thing that bugs me - don't you have to keep your head perfectly straight and at a certain distance from the displays for this to work?
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Generally yes, and actually distance is more important than perfectly-straight position.Rosomack wrote:Only thing that bugs me - don't you have to keep your head perfectly straight and at a certain distance from the displays for this to work?
You can still move head a tiny-bit during viewing, I'm didn't tried this with TrackIR yet, but I think in some small-degrees it can be used.
What is more important if you tired your neck during game, you can put glasses off and continue to play it in perfect mono looking just on one of the projections
Also, my personal note that I'm don't actually move my head during FPS gaming, I think like most of other players,
so considering you don't move too much this method is pretty neat (yes, this is prism-smile, I'm pretty happy of it!)
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Rosomack
- Two Eyed Hopeful
- Posts: 95
- Joined: Sun Feb 15, 2009 1:45 pm
- Location: Gdansk, Poland
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Speaking strictly theoretically - what if you had a prism with adjustable angles? Would that make distance less of a concern? I could see that possible using a liquid-filled container such as here.
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Strictly theoretically it's possible - changing angle will change optimal viewing distance, but for adjustable solution better to use some mirrors system.Rosomack wrote:Speaking strictly theoretically - what if you had a prism with adjustable angles? Would that make distance less of a concern? I could see that possible using a liquid-filled container such as here.
This prism (with pre-calculated 18 degree angle between main surfaces) is made to view it from normal distance to computer screen
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Rosomack
- Two Eyed Hopeful
- Posts: 95
- Joined: Sun Feb 15, 2009 1:45 pm
- Location: Gdansk, Poland
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Couple that with a harness that keeps the visor level and you got yourself a high-resolution HMD Though that might be a bit of overkill...
It would require tinkering with the mirrors if you change your position often, but that's ok - considering the kind of stereo you get is actually near perfect.
I'll try the most basic version of this solution when I have the time, just for the fun of it . It's surely better than crosseyed.
It would require tinkering with the mirrors if you change your position often, but that's ok - considering the kind of stereo you get is actually near perfect.
I'll try the most basic version of this solution when I have the time, just for the fun of it . It's surely better than crosseyed.
- wuhlei
- Binocular Vision CONFIRMED!
- Posts: 287
- Joined: Tue Dec 18, 2007 4:23 am
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
If fiber optics are cheap enough it would be perfect! You would have quality and you could move your head.
Albert Einstein
"The true sign of intelligence is not knowledge but imagination."
"The true sign of intelligence is not knowledge but imagination."
- Okta
- Golden Eyed Wiseman! (or woman!)
- Posts: 1515
- Joined: Tue Feb 12, 2008 5:22 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Just tested with Oblivion and it works fine with the borders but only in crosseyed mode. The default is still messed up.Johnny-Mnemonic wrote:Just tried with v.1.10 - side by side driver, crosseyed, in "Assassins Creed" black borders appears and picture is in proper aspect ratio.Okta wrote:It does? I tried v1.10 yesterday and it doesnt.
Isn't side by side default the correct driver for these glasses? Crossseyed will give you reverse stereo.
"I did not chip in ten grand to seed a first investment round to build value for a Facebook acquisition."
Notch on the FaceDisgrace buyout.
Notch on the FaceDisgrace buyout.
- Johnny-Mnemonic
- Binocular Vision CONFIRMED!
- Posts: 261
- Joined: Sun Aug 24, 2008 5:52 am
- Location: Zurich area, Switzerland
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
No, this stereo-prism is designed to view crosseyed contentOkta wrote:Isn't side by side default the correct driver for these glasses? Crossseyed will give you reverse stereo.
If you try to use parallel stereopair you will receive reverse stereo.
Did you build yours prism?
Oculus Rift, Vuzix Wrap 920 AR!, Vuzix VR920, Liquid Image MRG 2.2, Razer Hydra, P5 Glove, Microsoft Kinect, TrackIR5, 2 x Hillcrest Labs Freespace tracker, Fujifilm finepix real 3d w3, GeForce 9800GT 1Gb, GeForce GT 430 1Gb, DELL XPS 17 l702x with GeForce 555 GT 3Gb, and good-old VFX1 setup
- Rosomack
- Two Eyed Hopeful
- Posts: 95
- Joined: Sun Feb 15, 2009 1:45 pm
- Location: Gdansk, Poland
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Could you explain how it would work with fiber optics? Not my area of expertise .wuhlei wrote:If fiber optics are cheap enough it would be perfect! You would have quality and you could move your head.
-
- Certif-Eyed!
- Posts: 642
- Joined: Sat Sep 22, 2007 3:11 am
- Location: Valencia (Spain)
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Basically, two endoscopes capturing the light from each of the views and guiding them to the eyes. Very expensive stuff.
Zalman Trimon ZM-M220W / Acer H5360 with Another Eye2000 shutters / nVIDIA GTX760
- Rosomack
- Two Eyed Hopeful
- Posts: 95
- Joined: Sun Feb 15, 2009 1:45 pm
- Location: Gdansk, Poland
Re: [DIY] Fluid-based prismatic stereoscopic goggles
I don't think it would require as much auxillary stuff as professional-grade endoscopes do... No need for a long, elastic and highly adjustable cable. Unless you want to view your bowel in stereo, that iscrim3 wrote:Basically, two endoscopes capturing the light from each of the views and guiding them to the eyes. Very expensive stuff.
Anyway, there's no way to judge the usability of fiber optics in this case without an endoscope.
- wuhlei
- Binocular Vision CONFIRMED!
- Posts: 287
- Joined: Tue Dec 18, 2007 4:23 am
- Contact:
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Do you think this will work?
4 OZ GLYCERINE, 100% VEGETABLE USP GRADE
This pure 100% USP grade vegetable glycerine (glycerin) is used in cosmetics and body care products to assist in retaining moisture and is helpful in pulling oxygen into the skin
Albert Einstein
"The true sign of intelligence is not knowledge but imagination."
"The true sign of intelligence is not knowledge but imagination."
- Likay
- Petrif-Eyed
- Posts: 2913
- Joined: Sat Apr 07, 2007 4:34 pm
- Location: Sweden
Re: [DIY] Fluid-based prismatic stereoscopic goggles
If it's transparent without colors, sure. Glycerin is working because it has the ability to refract light. Water can do the same but it vapourizes by time and may also leave dirty marks.
-
- Binocular Vision CONFIRMED!
- Posts: 276
- Joined: Wed Sep 01, 2010 7:58 pm
Re: [DIY] Fluid-based prismatic stereoscopic goggles
This looks like a great idea for full resolution full frame rate and full brightness 3D on a budget! not to mention ghost free 3D like a HMD!
This may even be a better way of building a 2 screen 3D setup than using a Planar Stereo Mirror setup, no need for special mirrors or polarizers.
I have Nvidia 3d vision already but I might just have to make one of these myself! Ghost free 3D for the win
I know this is a DIY thread but for those who are to lazy (or unable) to make their own these might be of interest:
http://www.amazon.com/3-D-Stereo-Prism- ... B00465OY3Y" onclick="window.open(this.href);return false;
Dont know if it would work with a 2 monitor setup or how good the quality is but thought I'd post it here in case someone wants to give it a try (the prisims slide side to side for IPD adjustment)
Also anyone tried adding magnification lenses to these to increase the FOV? (like using a Fresnel lens on a regular monitor)
This may even be a better way of building a 2 screen 3D setup than using a Planar Stereo Mirror setup, no need for special mirrors or polarizers.
I have Nvidia 3d vision already but I might just have to make one of these myself! Ghost free 3D for the win
I know this is a DIY thread but for those who are to lazy (or unable) to make their own these might be of interest:
http://www.amazon.com/3-D-Stereo-Prism- ... B00465OY3Y" onclick="window.open(this.href);return false;
Dont know if it would work with a 2 monitor setup or how good the quality is but thought I'd post it here in case someone wants to give it a try (the prisims slide side to side for IPD adjustment)
Also anyone tried adding magnification lenses to these to increase the FOV? (like using a Fresnel lens on a regular monitor)
Current System:
Oculus Rift Dev Kit, 3x 23" Passive 3D Monitors in 3D Vision Surround, Novint Falcon, 3rd Space Gaming Vest, ButtKicker, Razer Hydra, Logitech G25.
Previous 3D Systems:
Viewsonic PJD6531w 3D DLP Projector, Vuzix VR920, 24" Alienware and 22" Samsung 3D Vision Monitors, eDimensional 3D Glasses with 19" CRT Monitor
Oculus Rift Dev Kit, 3x 23" Passive 3D Monitors in 3D Vision Surround, Novint Falcon, 3rd Space Gaming Vest, ButtKicker, Razer Hydra, Logitech G25.
Previous 3D Systems:
Viewsonic PJD6531w 3D DLP Projector, Vuzix VR920, 24" Alienware and 22" Samsung 3D Vision Monitors, eDimensional 3D Glasses with 19" CRT Monitor
-
- One Eyed Hopeful
- Posts: 14
- Joined: Fri Aug 12, 2011 2:19 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
This method , could it work with the new Blu-ray 3D , the ones that requires 3D TVs and 3D glasses ?
- cadcoke5
- Binocular Vision CONFIRMED!
- Posts: 210
- Joined: Mon May 24, 2010 8:43 pm
- Location: near Lancaster, PA USA
Re: [DIY] Fluid-based prismatic stereoscopic goggles
I have a few thoughts about this;
I have read about making a very large spherical lens using a similar technique. In this case they bent one of the plastic sheets to form a curve. A similar technique might be used to widen the field of view in one direction.
Do any of the available stereo drivers support an adjustment for the chromatic aberration caused by the prisms? I.e. on one eye's image, shift blue to one side some amount and then the red pixels a little bit more. Then, do the same for the other eye, but in the opposite direction. Would they have a similar adjustment for the spherical lens setup?
A bit of internet searching turned up some useful threads regarding fluid filled cylindrical lenses;
http://www.avsforum.com/avs-vb/showthread.php?t=890913
A portion of a holography book at Google that has a chapter on these lenses
http://books.google.com/books?id=_o3zxj ... 7-PA224,M1
I wonder if gelatin might be added to reduce any chance of leakage?
Joe Dunfee
I have read about making a very large spherical lens using a similar technique. In this case they bent one of the plastic sheets to form a curve. A similar technique might be used to widen the field of view in one direction.
Do any of the available stereo drivers support an adjustment for the chromatic aberration caused by the prisms? I.e. on one eye's image, shift blue to one side some amount and then the red pixels a little bit more. Then, do the same for the other eye, but in the opposite direction. Would they have a similar adjustment for the spherical lens setup?
A bit of internet searching turned up some useful threads regarding fluid filled cylindrical lenses;
http://www.avsforum.com/avs-vb/showthread.php?t=890913
A portion of a holography book at Google that has a chapter on these lenses
http://books.google.com/books?id=_o3zxj ... 7-PA224,M1
I wonder if gelatin might be added to reduce any chance of leakage?
Joe Dunfee
- Likay
- Petrif-Eyed
- Posts: 2913
- Joined: Sat Apr 07, 2007 4:34 pm
- Location: Sweden
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Article i read in a sciencemagazine but gizmodo had it by googling: http://gizmodo.com/5116969/eyeglasses-w ... adjustable" onclick="window.open(this.href);return false; of glasses which uses liquid pressure to form the lensecurvature.
Afaik there are no stereodrivers that adjust for chromatic aberration and i'm not sure if it's even possible. In real world this phenomena is decreased by using lenses with different density tightly attached to each other. Maybe you can try run a movie through an avisynth script but i have no practical experience of this.
Afaik there are no stereodrivers that adjust for chromatic aberration and i'm not sure if it's even possible. In real world this phenomena is decreased by using lenses with different density tightly attached to each other. Maybe you can try run a movie through an avisynth script but i have no practical experience of this.
-
- One Eyed Hopeful
- Posts: 14
- Joined: Fri Aug 12, 2011 2:19 am
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Sorry if I disturb the topic but if we can see cross-eyed content can we see side-by-side content ?
- cadcoke5
- Binocular Vision CONFIRMED!
- Posts: 210
- Joined: Mon May 24, 2010 8:43 pm
- Location: near Lancaster, PA USA
Re: [DIY] Fluid-based prismatic stereoscopic goggles
Marcer, if you are asking why we have trouble seeing side-by-side content with our naked eyes, the reason is that your eyes were designed to aim closer together for objects that are closer. They never aim outward from each other, which would be necessary to see side-by-side content. And even if we could, the brain could not interpret it as distance.
Joe
Joe