RifTUP! FullHD Oculus DK1 upgrade kit
-
- One Eyed Hopeful
- Posts: 13
- Joined: Sat Jul 20, 2013 11:49 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
@Hornet...I agree about positional tracking ..although it will be useful in a cockpit when the resolution is bumped up in CV1. .............. To Get Riftup working with Vorpx.......you can download this free hex editor http://www.mh-nexus.de ...Open the editor then click on file and then open...navigate to your ovrservice folder ...for me it is C:\Program Files (x86)\Oculus\Service . Open the exe ....now do a search with the find option ...search for DKHD2. Take note of where it is. Then Search for DK2 ..copy the hex value for DK2. Then replace the hex value for DKHD2 with the DK2 hex value and add four zero's after it. Hex value for DKHD2 is 44 4B 48 44 32 For the DK2 its... 44 4B 32 . The new value should be 44 4B 32 00 00 . Enjoy Vorpx !!!
Last edited by willibeu on Fri Sep 19, 2014 11:32 am, edited 2 times in total.
- Hornet
- Cross Eyed!
- Posts: 160
- Joined: Sun May 25, 2008 1:42 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Thx a lot, is the bioshock infinite working with Vorpx?
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Yes, and it's awesome
- Hornet
- Cross Eyed!
- Posts: 160
- Joined: Sun May 25, 2008 1:42 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Thx, i look forward, i am installing my new powerstation i7, 780ti, hope it would be enough for it .
-
- One Eyed Hopeful
- Posts: 45
- Joined: Sun Apr 21, 2013 6:13 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Thanks for this, Willibeu. I think I understand. I am not home tonight but will try it when I get there. I run my RiftUP on a second computer where I have a second Vorpx install and would like it to work. I appreciate your advice.willibeu wrote:@Hornet...I agree about positional tracking ..although it will be useful in a cockpit when the resolution is bumped up in CV1. .............. To Get Riftup working with Vorpx.......you can download this free hex editor http://www.mh-nexus.de ...Open the editor then click on file and then open...navigate to your ovrservice folder ...for me it is C:\Program Files (x86)\Oculus\Service . Open the exe ....now do a search with the find option ...search for DK2HD. Take note of where it is. Then Search for DK2 ..copy the hex value for DK2. Then replace the hex value for DK2HD with the DK2 hex value and add four zero's after it. Hex value for DK2HD is 44 4B 48 44 32 For the DK2 its... 44 4B 32 . The new value should be 44 4B 32 00 00 . Enjoy Vorpx !!!
- Hornet
- Cross Eyed!
- Posts: 160
- Joined: Sun May 25, 2008 1:42 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Hi guys, please it is complicated to work RiftUp with new 0.4.1 runtime ?
Yesterday (night I tested finally DK2 with new PC with 780Ti and after short test with upgraded First Law I have to say WOW! It is really good, smoth movement, accetable FOV, positional tracking good working, really good. Now I want to test with it RiftUp, what tweeking is needed for it to work with 0.4.1 Thx
VR is really here !!!!
Yesterday (night I tested finally DK2 with new PC with 780Ti and after short test with upgraded First Law I have to say WOW! It is really good, smoth movement, accetable FOV, positional tracking good working, really good. Now I want to test with it RiftUp, what tweeking is needed for it to work with 0.4.1 Thx
VR is really here !!!!
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: RifTUP! FullHD Oculus DK1 upgrade kit
I'm going to write a little patcher for the OVRService, so those that want to try VorpX with their RiftUp don't have to faff about with hex editors.
Other than that little patch required, there's nothing else needed to make the RiftUp work with SDK 0.4.1
Other than that little patch required, there's nothing else needed to make the RiftUp work with SDK 0.4.1
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Extract the attached executable, drag and drop the OVRService onto it, it will create a patched version with a .ritfup extension. Replace the current one in your Oculus/Servicefolder with the patched one (rename the existing one and remove the .riftup extension from the patched one), and run it.
If, when you open the Config Utility it now shows a DK2 instead of a DKHD2 prototype, then it worked and you should find you can now run VorpX.
If, when you open the Config Utility it now shows a DK2 instead of a DKHD2 prototype, then it worked and you should find you can now run VorpX.
You do not have the required permissions to view the files attached to this post.
-
- One Eyed Hopeful
- Posts: 4
- Joined: Thu Jan 02, 2014 2:51 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
That (vaporware) KOE TX18D200VM0EAA 7" 1920*1080 LVDS panel may have materialised at last - this stock was added to Panelook a couple of weeks ago: http://www.panelook.com/TX18D200VM0EAA_ ... 49811.html
EDIT: No luck - I contacted the seller, and apparently there is no stock...
EDIT: No luck - I contacted the seller, and apparently there is no stock...
Last edited by Quppa on Wed Aug 27, 2014 12:40 am, edited 1 time in total.
-
- One Eyed Hopeful
- Posts: 13
- Joined: Sat Jul 20, 2013 11:49 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Just tried Skyrim with Vorpx and ........Incredible!!!!!!. No settings in Vorpx needed adjustment. You can just hang by the river and look up at the mountains without playing at all. The scale is perfect and the 3D pops. Very Very impressed. Two things I did have to do though was turn off chromatic aberration fixer in vorpx controls. Us Riftups don't need it. ....and if you have shadow flickering...... in the skyrim prefs ini. change bDeferredShadows=1 to bDeferredShadows=0 ...for some reason it has fixed the shadow problem either way if its zero make it 1 ...if its 1 make it zero. People complaining about Vorpx costing 40 dollars are insane. Skyrim alone is worth the forty dollars.
-
- One Eyed Hopeful
- Posts: 45
- Joined: Sun Apr 21, 2013 6:13 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
DrBeef, You are my hero! Thanks man!DrBeef wrote:Extract the attached executable, drag and drop the OVRService onto it, it will create a patched version with a .ritfup extension. Replace the current one in your Oculus/Servicefolder with the patched one (rename the existing one and remove the .riftup extension from the patched one), and run it.
If, when you open the Config Utility it now shows a DK2 instead of a DKHD2 prototype, then it worked and you should find you can now run VorpX.
-
- One Eyed Hopeful
- Posts: 4
- Joined: Thu Jan 02, 2014 2:51 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Seems a couple of sellers do have stock, however - one is quoting US$656/pc (excluding shipping), and the other is asking for US$780/pc (plus US$40 shipping). Given that one can buy a Nexus 7 (with its 1200x1920 screen) for less than US$300, these prices seem unreasonably high. On the other hand, a 7" landscape 1920x1080 LVDS IPS panel is appealing...Quppa wrote:That (vaporware) KOE TX18D200VM0EAA 7" 1920*1080 LVDS panel may have materialised at last - this stock was added to Panelook a couple of weeks ago: http://www.panelook.com/TX18D200VM0EAA_ ... 49811.html
EDIT: No luck - I contacted the seller, and apparently there is no stock...
- Hannibalj2
- Binocular Vision CONFIRMED!
- Posts: 300
- Joined: Sun May 26, 2013 2:45 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Quppa wrote:Seems a couple of sellers do have stock, however - one is quoting US$656/pc (excluding shipping), and the other is asking for US$780/pc (plus US$40 shipping). Given that one can buy a Nexus 7 (with its 1200x1920 screen) for less than US$300, these prices seem unreasonably high. On the other hand, a 7" landscape 1920x1080 LVDS IPS panel is appealing...Quppa wrote:That (vaporware) KOE TX18D200VM0EAA 7" 1920*1080 LVDS panel may have materialised at last - this stock was added to Panelook a couple of weeks ago: http://www.panelook.com/TX18D200VM0EAA_ ... 49811.html
EDIT: No luck - I contacted the seller, and apparently there is no stock...
Even if you get the display, the internal boards are not suppose to handle 1080p display, regadless if the signal is lvds. BTW, those display's are very heavy.
Portal Dual 180+ HFOV HMD: http://www.mtbs3d.com/phpBB/viewtopic.php?f=26&t=18335
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
PORTAL DUAL VR, Downloads: http://hannibalj2.jimdo.com/
- ThePhilosopher
- One Eyed Hopeful
- Posts: 37
- Joined: Thu Jun 14, 2012 4:42 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Even if it's a good thing, a bigger screen is not what is the most needed on our HMD.
The main problem is for me motion blur.
and even a better resolution is useless : you move just a little and your superb 4k screen will go blurry.
The main problem is for me motion blur.
and even a better resolution is useless : you move just a little and your superb 4k screen will go blurry.
I Would Choose The Matrix
-
- One Eyed Hopeful
- Posts: 5
- Joined: Thu Dec 26, 2013 5:47 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Hi Quppa,Quppa wrote:Seems a couple of sellers do have stock, however - one is quoting US$656/pc (excluding shipping), and the other is asking for US$780/pc (plus US$40 shipping). Given that one can buy a Nexus 7 (with its 1200x1920 screen) for less than US$300, these prices seem unreasonably high. On the other hand, a 7" landscape 1920x1080 LVDS IPS panel is appealing...Quppa wrote:That (vaporware) KOE TX18D200VM0EAA 7" 1920*1080 LVDS panel may have materialised at last - this stock was added to Panelook a couple of weeks ago: http://www.panelook.com/TX18D200VM0EAA_ ... 49811.html
EDIT: No luck - I contacted the seller, and apparently there is no stock...
I'm interested to buy this display, did you have/find a driver board for it? If yes please tell me where can I buy one?
Thanks
- Kernel32
- One Eyed Hopeful
- Posts: 37
- Joined: Sun May 26, 2013 7:52 am
- Location: Prague, Czech Republic
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Hi guys,
thank you for your great efforts regarding the RiftUp software integration. Big thanks goes especially to DrBeef.
Closed Oculus SDK makes things very hard for DIY projects like RiftUp.
VR Union MTBS3D Community Fund for Open-Source VR - VUMCO
To appreciate these honorable efforts, from now on, 5 dollars from every RiftUp sale will be added towards VR Union MTBS3D Community Fund.
Those money will be given to community members supporting software efforts to integrate RiftUp or make VR software more open-source in general.
Community Fund Voting
The goal is to compensate community members for their valuable time spent on development.
We'll setup a voting thread here every 30 days for you to allocate those funds. (Hopefully there will be something to allocate.)
RiftUp batch 3
There has been a massive increase in inquiries since DK2 came out. People are most likely a little disappointed by the fake FullHD Pentile panel.
It is now possible to reserve or pre-order RiftUp batch 3 units at http://riftup.vrunion.com/
I hope we can now start giving something in return for all the support.
Thank you very much,
Karel
thank you for your great efforts regarding the RiftUp software integration. Big thanks goes especially to DrBeef.
Closed Oculus SDK makes things very hard for DIY projects like RiftUp.
VR Union MTBS3D Community Fund for Open-Source VR - VUMCO
To appreciate these honorable efforts, from now on, 5 dollars from every RiftUp sale will be added towards VR Union MTBS3D Community Fund.
Those money will be given to community members supporting software efforts to integrate RiftUp or make VR software more open-source in general.
Community Fund Voting
The goal is to compensate community members for their valuable time spent on development.
We'll setup a voting thread here every 30 days for you to allocate those funds. (Hopefully there will be something to allocate.)
RiftUp batch 3
There has been a massive increase in inquiries since DK2 came out. People are most likely a little disappointed by the fake FullHD Pentile panel.
It is now possible to reserve or pre-order RiftUp batch 3 units at http://riftup.vrunion.com/
I hope we can now start giving something in return for all the support.
Thank you very much,
Karel
-
- One Eyed Hopeful
- Posts: 11
- Joined: Fri Sep 05, 2014 1:08 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Hi, i buy a riftup yesterday i dont have order reference only have note of pay with my paypal. Is Ok ? When i have my riftUp at my home?
- ThePhilosopher
- One Eyed Hopeful
- Posts: 37
- Joined: Thu Jun 14, 2012 4:42 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
What a pathetic screen for the new Iphone 6 display!
Sony opted for the same 1080p (Full HD) screen that it packed into its Xperia Z2, helping to conserve battery life. Apple, meanwhile, has gone for a slightly lower resolution on its screen, opting for 1,704 x 960 pixels instead of 1,920 x 1,080, for a total 416ppi compared to Sony's 423.64ppi.
It won't be our next Oculus Rift replacement so long awaited. RiftUp! can be serene for some time
Sony opted for the same 1080p (Full HD) screen that it packed into its Xperia Z2, helping to conserve battery life. Apple, meanwhile, has gone for a slightly lower resolution on its screen, opting for 1,704 x 960 pixels instead of 1,920 x 1,080, for a total 416ppi compared to Sony's 423.64ppi.
It won't be our next Oculus Rift replacement so long awaited. RiftUp! can be serene for some time
I Would Choose The Matrix
- Kernel32
- One Eyed Hopeful
- Posts: 37
- Joined: Sun May 26, 2013 7:52 am
- Location: Prague, Czech Republic
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Hi Jose, we got your order. You maybe very lucky and get RiftUp prior batch 3 production starts. As you were one of the first costumers after announcement.Elevation wrote:Hi, i buy a riftup yesterday i dont have order reference only have note of pay with my paypal. Is Ok ? When i have my riftUp at my home?
IGZO display could have nearly doubled battery life if used right. Major mistake iPhone 6 don't have those. Some of Apple employees are going to loose their Jobs pretty soon again. This is not the pioneer/innovative company it used to be. Asia companies are supposed to copycat Apple. Not the other way around.ThePhilosopher wrote:What a pathetic screen for the new Iphone 6 display!
Sony opted for the same 1080p (Full HD) screen that it packed into its Xperia Z2, helping to conserve battery life. Apple, meanwhile, has gone for a slightly lower resolution on its screen, opting for 1,704 x 960 pixels instead of 1,920 x 1,080, for a total 416ppi compared to Sony's 423.64ppi.
It won't be our next Oculus Rift replacement so long awaited. RiftUp! can be serene for some time
We have already display and board of astonishing parameters. Far superior to RiftUp FullHD. The only problem right now are very large MOQs (10 000s).
I'm working on getting a better deal night and day and so does Daniel.
Also, good news. VUMCO got some traction and cooperation with other VR manufacturers seems plausible. Negotiations begin now.
-
- One Eyed Hopeful
- Posts: 1
- Joined: Sun Jan 20, 2013 7:35 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
So, it is possible, that 3rd batch will include new screens, or it's just an announcement of the future upgrade kit? If so, how would you describe awaited terms, when production of these new kits would start?Kernel32 wrote:We have already display and board of astonishing parameters. Far superior to RiftUp FullHD. The only problem right now are very large MOQs (10 000s).
I'm working on getting a better deal night and day and so does Daniel.
The purpose of wondering is to decide - is it worth ordering RiftUP now, or it's better to wait for a couple of months.
Also, if it (new panels) is not in the nearest future - what is your prognosis of 3-rd batch production start?
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
I have a DK2 and a RiftUP.
There is now a bit of a problem with judder on the DK2 for triangle counts greater than demo scenes.
It could pan out that the DK2 may have to be shelved as a promising idea, but bad implementation.
It looks like OVR are not going to open source their runtime software for the community
to have a go.
This is an opportunity for Rozsnyo to sell more of his kits. Maybe the RiftUp is the wrong
solution, just sell standalone kit.
There is now a bit of a problem with judder on the DK2 for triangle counts greater than demo scenes.
It could pan out that the DK2 may have to be shelved as a promising idea, but bad implementation.
It looks like OVR are not going to open source their runtime software for the community
to have a go.
This is an opportunity for Rozsnyo to sell more of his kits. Maybe the RiftUp is the wrong
solution, just sell standalone kit.
Last edited by cgp44 on Sun Sep 14, 2014 9:45 pm, edited 1 time in total.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
@kernel32
Best of luck getting a workable minimum order quantity.
Are the screens available at the replacement merchants?
Perhaps you should just sell the electronics with instructions for
screen purchase.
Best of luck getting a workable minimum order quantity.
Are the screens available at the replacement merchants?
Perhaps you should just sell the electronics with instructions for
screen purchase.
Last edited by cgp44 on Mon Sep 15, 2014 2:56 am, edited 1 time in total.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
The touch screens are now glued to the displays. You cannot apply heat to them without destroying the
displays. Crack the glass (the display substrate never cracks) you buy a whole new screen, good for sales.
displays. Crack the glass (the display substrate never cracks) you buy a whole new screen, good for sales.
Last edited by cgp44 on Thu Sep 18, 2014 7:15 pm, edited 1 time in total.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Beware FPGA vendors pushing their fancier chipsets. A lot of the specialised edge interface circuitry can be implemented in code with the appropriate placement constraints.OzOnE2k10 wrote:
Obviously, the smaller / cheaper FPGAs are still fairly limited on the maximum pixel clock output due to the DDR / DDIO stuff, but might be usable for 720p and maybe 1080p with a bigger FPGA?
-
- One Eyed Hopeful
- Posts: 24
- Joined: Tue May 27, 2008 11:40 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
anyone had any luck introducing cooling or extra vents to cool the RU? 30 mins racing is enough for my eyeballs to start sweating.
-
- One Eyed Hopeful
- Posts: 13
- Joined: Sat Jul 20, 2013 11:49 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
@Dr. Beef.......I have had some great success with Riftup and Tridef ...just got it to work perfectly with Falcon BMS. A fantastic experience ...The best VR flight sim of all my flight sims and I have many. Prepar3D is almost there ..they will be coming out with a plugin in a week or two to clinch it...but I digress....It seems DK2 users are not able to have any luck with Tridef ...I think they would kill for it to run with just head tracking. Our Riftups are recognized by Tridef why aren't the DK2s? I know you have a DK2 on the way, maybe you could figure it out. People are getting very frustrated over at the Tridef forums....No answer from Tridef in months. I just want others to have the same experiences that I am. The flight sim community would love it. I dont mean to blow wind up your skirt but you have made many happy here ....
-
- One Eyed Hopeful
- Posts: 41
- Joined: Thu Jul 03, 2014 2:13 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
GOOD NEWS! New 7" 1200p (1200x1920) panels and boards with HDMI input are now available for $199 US at mkt.com/vronline
@willibeu Thanks for posting
To be honest, the community knows it should drop the Rift after the company sold to fb and went dark side to greedy corp monetizing the humans.
All of the "fan boys" should know that the company they were fans of is long gone.
@willibeu Thanks for posting
willibeu wrote:@Hornet...I agree about positional tracking ..although it will be useful in a cockpit when the resolution is bumped up in CV1. .............. To Get Riftup working with Vorpx.......you can download this free hex editor http://www.mh-nexus.de ...Open the editor then click on file and then open...navigate to your ovrservice folder ...for me it is C:\Program Files (x86)\Oculus\Service . Open the exe ....now do a search with the find option ...search for DK2HD. Take note of where it is. Then Search for DK2 ..copy the hex value for DK2. Then replace the hex value for DK2HD with the DK2 hex value and add four zero's after it. Hex value for DK2HD is 44 4B 48 44 32 For the DK2 its... 44 4B 32 . The new value should be 44 4B 32 00 00 . Enjoy Vorpx !!!
To be honest, the community knows it should drop the Rift after the company sold to fb and went dark side to greedy corp monetizing the humans.
All of the "fan boys" should know that the company they were fans of is long gone.
-
- One Eyed Hopeful
- Posts: 41
- Joined: Thu Jul 03, 2014 2:13 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
@DrBeef: Thanks for the nice post. Does this work with any non-rift panel as long as STM32 is there?
DrBeef wrote:Extract the attached executable, drag and drop the OVRService onto it, it will create a patched version with a .ritfup extension. Replace the current one in your Oculus/Servicefolder with the patched one (rename the existing one and remove the .riftup extension from the patched one), and run it.
If, when you open the Config Utility it now shows a DK2 instead of a DKHD2 prototype, then it worked and you should find you can now run VorpX.
-
- One Eyed Hopeful
- Posts: 11
- Joined: Tue May 27, 2014 11:50 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
The STM32 doesn't work since firmware 0.4. Only with 0.3.GOD wrote:@DrBeef: Thanks for the nice post. Does this work with any non-rift panel as long as STM32 is there?
Any software compiled with 0.4 (and therefore requiring the runtime) will not work.
Maybe with a USB dump of the handshake between an original DK1 and the new firmware, the code could be updated.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
I am very grateful I purchased the RiftUP!, as I would be screwed now with the DK2.
I would be in the situation of waiting for OVR to fix the current issues.
I would not be able to continue my work which is parametric modelling that I have
just added the OVR sdk 0.3.x output to their xml format input. The XML input format is very limited, but useful for
model immersion which is FAR FAR better than a 2D screen, using Animation Master.
The issue for me is as soon as I output a moderate amont of triangles into the scene, the DK2
starts juddering to hell. I think I tried the extended mode etc, but got fed up and went back to the RiftUP!
This mentioned, I would suggest that you guys don't get too hasty to play with sdk 0.4.2.
Play with 0.3.x in the mean time.
I would be in the situation of waiting for OVR to fix the current issues.
I would not be able to continue my work which is parametric modelling that I have
just added the OVR sdk 0.3.x output to their xml format input. The XML input format is very limited, but useful for
model immersion which is FAR FAR better than a 2D screen, using Animation Master.
The issue for me is as soon as I output a moderate amont of triangles into the scene, the DK2
starts juddering to hell. I think I tried the extended mode etc, but got fed up and went back to the RiftUP!
This mentioned, I would suggest that you guys don't get too hasty to play with sdk 0.4.2.
Play with 0.3.x in the mean time.
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: RifTUP! FullHD Oculus DK1 upgrade kit
I've been using SDK 0.4.2 with my RiftUp! since it came out and is seems ok to me so far. I've not had any insurmountable issues with it.cgp44 wrote:This mentioned, I would suggest that you guys don't get too hasty to play with sdk 0.4.2.
Play with 0.3.x in the mean time.
The only hack I've had to do was to use the patcher to modify the OVRService so that it can pretend it is a DK2 for the sake fo VorpX, otherwise it is working just fine with anything I try (though I have had to disable the Legacy Mode tick box when running anything built against the 0.4.2 SDK).
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
That happened to me. If we are on the same page. The edid display announcing of the DK1 tracker in the RiftUpllluis wrote:The STM32 doesn't work since firmware 0.4. Only with 0.3.GOD wrote:@DrBeef: Thanks for the nice post. Does this work with any non-rift panel as long as STM32 is there?
Any software compiled with 0.4 (and therefore requiring the runtime) will not work.
Maybe with a USB dump of the handshake between an original DK1 and the new firmware, the code could be updated.
is blocked from cluttering up the PC's extended screen. How did DrBeef overcome this? Did he overwrite the
identity of the DK1 in the tracker firmware with the DK2 id.
Last edited by cgp44 on Fri Sep 19, 2014 4:10 am, edited 1 time in total.
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: RifTUP! FullHD Oculus DK1 upgrade kit
I just hacked the ovr service, rather than the firmware. The firmware is still the same one we originally modified after the RiftUp was released.cgp44 wrote:How did DrBeef overcome this? Did he overwrite the
identity of the DK1 in the tracker firmware with the DK2 id. Edit: he answered me before I submitted the post.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Very interesting RiftUP OK with the runtime. Was this for games with large amount of graphics, ie didDrBeef wrote: I've been using SDK 0.4.2 with my RiftUp! since it came out and is seems ok to me so far. I've not had any insurmountable issues with it.
you fps go lower than some critical amount (75hz, 40hz?), or have you a beasty GPU.
The RiftUP of course does not have the DK2's low persistencty implementation of the 350 line banding
where each frame line is kept lit for only 20 per cent of the frame time instead of on all the frame time, which
make a moving band going down the frame.
Suspecting that this with lower frame rates is causing the juddering issue which is the screen flashing.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
So you changed the DK2 identity in the ovr service instead of the tracker firmware?DrBeef wrote:
I just hacked the ovr service, rather than the firmware. The firmware is still the same one we originally modified after the RiftUp was released.
- DrBeef
- Vireio Perception Developer
- Posts: 328
- Joined: Wed Aug 14, 2013 6:20 am
- Location: London
Re: RifTUP! FullHD Oculus DK1 upgrade kit
yes, well, actually all I did was change the string "DKHD2" to "DK2.." (where the . is 0), so when it returns the string any process reading it thinks it is a DK2 attached (including the oculus config util).
Though to be honest, it was working ok before that too. I have a GTX 780, so a pretty good GPU (and suddenly feels dated with the latest anouncement of the 980)
Though to be honest, it was working ok before that too. I have a GTX 780, so a pretty good GPU (and suddenly feels dated with the latest anouncement of the 980)
-
- One Eyed Hopeful
- Posts: 11
- Joined: Tue May 27, 2014 11:50 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
That's what happen when you post asleep.
I meant that the STM32 firmware doesn't work with SDK 0.4.
And when I say STM32 firmware I'm referring to Yetifrisstlama's running on a STM32F3Discovery board. No original DK1 involved.
Is there another out there we can use?
Something in the STM32 firmware responds differently than an original DK1, that's why the USB dump is needed, to compare the values.
For the STM32, it's not being detected.
What's / where's this RiftUp firmware?
The RiftUp is using an original DK1 tracker, isn't? What I saw was just a hack to change return of the Display Descriptor with the new screen parameter, and not a complete firmware to write to an STM32.
I meant that the STM32 firmware doesn't work with SDK 0.4.
And when I say STM32 firmware I'm referring to Yetifrisstlama's running on a STM32F3Discovery board. No original DK1 involved.
Is there another out there we can use?
The problem is that the SDK 0.4 runtime doesn't detect the STM32 at all. It says no device is plugged.cgp44 wrote:That happened to me. If we are on the same page. The edid display announcing of the DK1 tracker in the RiftUp
is blocked from cluttering up the PC's extended screen. How did DrBeef overcome this? Did he overwrite the
identity of the DK1 in the tracker firmware with the DK2 id.
Something in the STM32 firmware responds differently than an original DK1, that's why the USB dump is needed, to compare the values.
In this case, the OVR service is detecting the tracker and just the type detected is being changed.DrBeef wrote:I just hacked the ovr service, rather than the firmware. The firmware is still the same one we originally modified after the RiftUp was released.cgp44 wrote:How did DrBeef overcome this? Did he overwrite the
identity of the DK1 in the tracker firmware with the DK2 id. Edit: he answered me before I submitted the post.
For the STM32, it's not being detected.
What's / where's this RiftUp firmware?
The RiftUp is using an original DK1 tracker, isn't? What I saw was just a hack to change return of the Display Descriptor with the new screen parameter, and not a complete firmware to write to an STM32.
-
- One Eyed Hopeful
- Posts: 11
- Joined: Tue May 27, 2014 11:50 pm
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Only US addresses.GOD wrote:GOOD NEWS! New 7" 1200p (1200x1920) panels and boards with HDMI input are now available for $199 US at mkt.com/vronline
Does anyone know if the controller board have only HDMI input?
-
- One Eyed Hopeful
- Posts: 41
- Joined: Thu Jul 03, 2014 2:13 am
Re: RifTUP! FullHD Oculus DK1 upgrade kit
@illuis: Can ship to international addresses. Simply send a PM to Me.
@cgp44 and @DrBeef : I (and seemingly many in the community) would certainly like to get the STM32 functioning properly with SDK 4.
Thanks in advance! Although I am highly recommending to jump ship on rift after the fb deal, would still be nice to have compatibility. Obviously ovr is over.
1440p displays are now available and I have a reasonable price quote for 1000 pieces. And almost done designing the best HMD casing I have ever seen. Any investors are welcome to PM.
llluis wrote:Only US addresses.GOD wrote:GOOD NEWS! New 7" 1200p (1200x1920) panels and boards with HDMI input are now available for $199 US at mkt.com/vronline
Does anyone know if the controller board have only HDMI input?
@cgp44 and @DrBeef : I (and seemingly many in the community) would certainly like to get the STM32 functioning properly with SDK 4.
Thanks in advance! Although I am highly recommending to jump ship on rift after the fb deal, would still be nice to have compatibility. Obviously ovr is over.
1440p displays are now available and I have a reasonable price quote for 1000 pieces. And almost done designing the best HMD casing I have ever seen. Any investors are welcome to PM.
-
- Binocular Vision CONFIRMED!
- Posts: 281
- Joined: Tue Oct 29, 2013 10:21 pm
- Location: christchurch NZ
Re: RifTUP! FullHD Oculus DK1 upgrade kit
Sorry I was wrong in my assumptions. I had turned the OVR runtime service off, hence there was no
direct mode connection with the tracker. I should have tried the RiftUp! with the service running to see
if it was ok, but I had had enough with 0.4.2's setup. I should have tested the theory that the low persistence
350 line frame banding was the cause of the screen flashing/juddering, but DrBeef has done this partially for me.
@DrBeef have you a game that can be put into low framerate on your gtx780 to check if everything is still smooth?
direct mode connection with the tracker. I should have tried the RiftUp! with the service running to see
if it was ok, but I had had enough with 0.4.2's setup. I should have tested the theory that the low persistence
350 line frame banding was the cause of the screen flashing/juddering, but DrBeef has done this partially for me.
@DrBeef have you a game that can be put into low framerate on your gtx780 to check if everything is still smooth?