Hello to all, helle Freke1
great idea to post a testpicture to deremine ghosting - unfortunately Freke1's test picture has some disadvantages:
- there is no possibility to calibrate your monitor
- it's hard to compare the ghosting result with the scale since it is placed away from the test sqare
- IMO the ghosting scale is not correct - it shoulg go from 0% ghosting to 100% ghosting - where 0 = no ghosting at all - 100% is full ghosting (same as you would not wear any glasses)
I made a new ghosting test picture where these disadvantages are not present
- First load the picture and calibrate your monitor so all grey scales are visible (change brightness and contrast if necessary)
- then loock at the test picture viewing it once with your left and then with your right eye - you will detct a white ghosting (white seems to be dominant at ghosting) as well as maybe also a black ghosting - so you'll get 4 results
-- left eye white ghosting (LW)
-- left eye black ghosting (LB)
-- right eye white ghosting (RW)
-- right eye black ghosting (RB)
the lower part of the test picture shows the same test only black/white reversed - the results campared to the upper test should be identical
you may download my test picture from:
http://www.3d-hdv.net/forum/ghosting_te ... wbloos.jpg
here are the results for my preproduction Zalman 22" monitor (I'll post the results of the newer model later) using my testpicture
LW: 10%, LB: 0%, RW: 10%, RB: 0%
greetings
Werner